Bedienungsanleitung AEG WS 100 S (Seite 3 von 23) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

463286

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

2WSL 115 XS, WSL 125 X, WS 100 S, WS 115 S, WS 125 S

4 Before you use this tool

Always disconnect the plug from the socket

before carrying out any work on the machine.

4.1 Installation of Guard

Place guard on the gear neck (LEERER MERKER)

of the machine and then tighten screw

(LEERER MERKER).

The position of the guard can be adjusted to the

requirements of the work process. When making

this adjustment, take care to ensure that the

grinding disc can rotate freely.

4.2 Installation of Grinding Disc

Secure working spindle (LEERER MERKER) by

pressing spindle lock (LEERER MERKER).

Only press spindle lock when the machine is

turned off.

Mount back flange (LEERER MERKER), grinding

disc (LEERER MERKER) and flange nut

(LEERER MERKER) according to the illustration

and tighten flange nut with a pin–type spanner.

When the thickness of the disc is less than 5,5 mm

use the flange nut with the flat side against the

grinding disc.

4.3 Mains connection

Connect only to a single-phase AC current supply

and only to the mains voltage specified on the

rating plate. Connection to sockets without earth

protection is possible as the appliance features

protective insulation to DIN 57 740/ VDE 0740 and

CEE 20. Radio suppression complies with the

European standard EN 55014.

When fitting the plug, make sure that the brown

(live) wire of this appliance is connected to the plug

terminal marked L or coloured red, and the blue

(neutral) wire of this appliance is connected to the

plug terminal marked N or coloured black. Under no

circumstances must the wires of this appliance be

connected to the earth terminal of the plug marked

either E, with the earth symbol or coloured green or

green/yellow.

5 On-off switch

Intermittant Use

Switching on: Push forward on–off control

(LEERER MERKER) without pressure

Switching off: Release on–off control

Continuous Use

Switching on: Push forward on–off control

(LEERER MERKER) without pressure and then

press the button. On–off control will remain on.

Switching off: Press on–off control then release.

6 Operation

When grinding do not apply pressure to the

workpiece by bearing down on the machine but

move the grinding disc backward and forward over

the working surface.

Grinding

For best results with grinding discs, keep the disc at

an angle at least 30

to the working surface.

Overloading the machine during grinding operations

will harm the machine, reduce disc life and produce

inferior results.

Never use cutting discs for grinding operations.

Cutting

When cutting, avoid tilting the grinder away from

the cutting plane.

When cutting stone, the use of the guide

(LEERER MERKER is necessary.

For grinding larger areas use backing pad with

abrasive paper.

For removal of old paint and for derusting use steel

brush.

7 Accessories

The range of accessories with part numbers is

shown in our catalog.

8 Service

The ventilation slots of the machine must be kept

clear at all times.

Use only AEG accessories and spare parts. Should

components need to be replaced which have not

been described, please contact one of our AEG

service agents (see our list of guarantee/service

addresses).

If needed, an exploded view of the tool can be

ordered. Please state the ten–digit No. as well as

the machine type printed on the label and order the

drawing at your local service agents or directly at:

Atlas Copco Elektrowerkzeuge GmbH,

Postfach 320, D–71361 Winnenden.

Modifications: Text, diagrams and data are correct at the time of

printing. In the interest of continuous improvement of our

products, technical specifications are subject to alteration without

prior notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG WS 100 S Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info