Bedienungsanleitung Aeris A300 AI (Seite 33 von 52) (Englisch)

618070

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

A300 AI OPERATING MANUAL

SET GROUPS

Information that follows describes the selections contained in the GAUG Set Groups (A, U, T, S, D, P) that are accessed from the

Set Menu.

Main Menu >> Set Menu >> Set Group Menu >> Set Selection.

SET A (ALARMS), shared with NORM (see page 15).

SET U (UTILITIES), shared with NORM (see page 16).

SET T (TIME/DATE), shared with NORM (see page 16).

SET S (Shortcut) Menu, information includes (Fig. 74):

> Graphics SEt S and MENU.

Selections include:

> LOG MENU.

> MY INFO (this is the default Shortcut until another item is selected)

> SET HEADING.

> SET TIME.

One item can be selected from the list. That item (referred to as a Shortcut) can then be accessed directly by pressing M (2 sec)

while viewing the Surface Main.

• A (< 2 sec) to step forward (down) through selections.

• M (< 2 sec) to step back (up) through selections.

• S (< 2 sec) when the pointer icon ( > ) is next a selection will save it as the Shortcut and revert to the Set Menu.

• S (2 sec) to revert to Main Menu.

SET D (Dive Main) Menu, information includes (Fig. 75):

> Graphics SEt d and MENU.

The default screen for dives displays Current Depth, Run Timer, Pressure, and ATR (air time remaining).

Max Depth is displayed on an Alternate screen.

Selections include:

> USE DEFAULT >>

displays Run Time and EDT.

> ADD MAX D >>

displays Max Depth and EDT

• A or M (< 2 sec) to toggle between selections.

• S (< 2 sec) when the pointer icon ( > ) is next to a selection will save* it as the Dive Main and revert to the Set Menu.

• S (2 sec) to revert to Main Menu.

*Ensure that the selection to be saved reﬂects information you want to see on the Dive Main, it cannot

be changed during the dive (only while on the surface using this menu).

SET P (Preview) Menu, information includes (Fig. 88):

> Graphics SEt P and MENU.

Using this menu, you can chose up to 4 items (Set Points that have been entered using Set P) for display on a Preview screen

that can be accessed from the Surface Main Menu.

Selections include:

> DEPTH AL SET

> EDT AL SET

> TURN AL SET

> END AL SET

> GLO DUR SET

• A (< 2 sec) to step forward through Menu selections.

• M (< 2 sec) to step back through Menu selections.

• S (< 2 sec) when the pointer icon ( > ) is next a selection will toggle* it between solid and ﬂashing.

*Once 4 items are ﬂashing, another item cannot be toggled to ﬂash until one of the ﬂashing items is toggled to solid.

When satisﬁed that those items ﬂashing (up to 4) are what you want for the Preview screen, press S (2 sec) to display all items

ﬂashing (Fig. 77), then press S (< 2 sec) to revert to the Preview screen with all items solid.

Fig. 74 - GAUG SET S

Fig. 75 - GAUG SET D

Fig. 76 - SET P

(stepping through)

Fig. 77 - SET P MENU

(preview of selections)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeris A300 AI Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info