Bedienungsanleitung Aeris A300 AI (Seite 37 von 52) (Englisch)

618070

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

A300 AI OPERATING MANUAL

OVERVIEW

> S (2 sec) to access Compass OP Main from Surface or Dive Main.

> S (2 sec) or no button action (2 min*) to revert to Surface or Dive Main.

*During the ﬁnal 15 seconds, the remaining Compass On time is displayed. If a button is pressed during that time, the 2

minute On Time will reset allowing operation to remain in Compass Mode for 2 minutes.

> Compass OP Mode selected (North or Reference) >>

remains until changed

> Reference OP Mode >>

can set a course, then also select a Reverse course while on the surface and during dives

> Numeric values are displayed as 3 digits (000 to 360°), have a resolution of 001°, and an accuracy of +/- 005°.

> Operation will be normal and display of values will be within speciﬁed tolerances up to 90° tilt at which time the Heading

(diver's direction) digits are removed until the tilt angle is corrected.

Upon accessing the Compass, the OP (operating) Main of the last mode selected will be displayed >>

>> North (Fig. 81), Reference (Fig. 82), or Reverse Reference (Fig. 83).

While on the surface, press M (< 2 sec) to access the Compass Menu to change the OP Mode, Calibrate, or set Declination.

COMPASS MENU, information includes (Fig. 84) -

> Graphics SEL (select) and MENU, with graphic selections >>

> NORTH MODE,

select as OP Mode with no set heading

> REF MODE,

select as OP Mode with heading set

> CALIBRATE,

access to initiate Calibration

> SET DECLIN,

access to set Declination

> Compass On time remaining (shown as a reminder),

counting down from 15 to 0 (sec), blank when > 15 seconds

• A (< 2 sec) to step forward (down) through selections, down screen.

• M (< 2 sec) to step back (up) through selections, up screen

• S (< 2 sec) to select or access item indicated by pointer ( > ) icon.

• M (2 sec), any time, to revert to Compass OP Main.

• No button action (2 min) to revert to Surface or Dive Main.

If NORTH or REF MODE is selected, that mode will be saved and its OP Main will be displayed.

NORTH OP MAIN, information includes (Fig. 85) -

> Current Depth with FT (or M) icon, Surface Interval during ﬁrst 10 min on surface, blank on surface > 10 min.

> North Mode icon (letter N in box).

> Static Arrow icon (at 12 o'clock), diver direction of travel.

> Dynamic Arrow, relative direction of magnetic North.

> Numeric heading (diver's current direction), 001 to 360°, with position graphic (N, E, SE, etc.).

> On time remaining, counting down from 15 to 0 (sec).

• S (2 sec), or no button action during 2 min, to revert to Surface or Dive Main.

• S (< 2 sec) to activate Smartglo Backlight.

• M (< 2 sec) to access Compass Menu, surface only.

REFERENCE OP MAIN, information includes (Fig. 86) -

> Current Depth with FT (or M) icon, Surface Interval during ﬁrst 10 min on surface, blank on surface > 10 min.

> Reference Mode icon (2 bars with arrow, Fig. 86a) with numeric Reference heading (course) set below it.

> Static Arrow icon (at 12 o'clock), diver direction of travel.

> Turn Arrow icon (left or right) ﬂashing during any time the diver deviates => 10° off the heading set.

> Dynamic Arrow, tracking Reference direction set.

> Numeric heading (diver's current direction), 001 to 360°, with position graphic (N, E, SE, etc.).

> On time remaining, counting down from 15 to 0 (sec).

• S (2 sec), or no button action during 2 min, to revert to Surface or Dive Main.

• S (< 2 sec) to activate Smartglo Backlight.

• M (< 2 sec) to access Compass Menu, surface only.

• A (< 2 sec) to access Reference Menu, surface or dive.

REFERENCE MENU, information includes (Fig. 87) -

> Current Depth with FT (or M) icon, blank on surface.

> Graphic MENU, with graphic selections >>

> SET HEADING,

displays REF OP Main with the Heading ﬂashing allowing it to be set

> REVERSE HEADING,

to invert the course heading 180° (opposite to the Reference heading set)

> On time remaining, counting down from 15 to 0 (sec).

• A (< 2 sec) to step through the selections (SET then REVERSE), then revert to OP Main.

• S (< 2 sec) to save the selection and access the Set Heading or Reverse Heading screen.

Fig. 81 - NORTH OP MODE

Fig. 83 - REVERSE REF

Fig. 82 - REF OP MODE

Fig. 85 - NORTH OP MAIN

(at 105°)

Fig. 84 - COMPASS MENU

Fig. 86 - REF OP MAIN

(at 277°, turn left to 260°)

Fig. 87 - REF MENU

(during dive, surface similar)

actual

heading

actual

heading

course

set

actual

heading

180°

opposite

set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeris A300 AI Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info