Bedienungsanleitung Aeris A300 (Seite 15 von 56) (Englisch)

618065

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

A300/A300 XT OPERATING MANUAL

TECH SET GAS 2 (3 similar), information includes (Fig. 29):

> SET, FO2, Gas (tank) 2 icons.

> CF, Z+ (or DSAT) icons, if they apply.

> Graphic AIR (or OFF*) ﬂashing, or -

. . Max Depth allowed with FT (or M) and MAX icons.

. . FO2 (numeric) value ﬂashing.

Since there are only 2 digits, 100% is displayed as 00.

. . PO2 Alarm value with PO2 icon.

*OFF will prevent that Gas from being displayed as a switch option during dives.

• A (hold) to scroll upward through FO2 settings from OFF (if previously selected) to Air to 21 through 100% in 1% increments

at 8/sec, stopping when the button is released, or at 32, then at 50, then at 80 (even if A is held depressed).

• A (hold) again to resume the scroll upward through 100%, then stop at Air (or 21 if a repetitive Nitrox dive).

• A (< 2 sec) to step upward through the Set Points one at a time.

• M (< 2 sec) to step back through the Set Points one at a time.

• S (2 sec), if the setting is not changed, to step back to Set Gas Lead-in.

• 2 minutes, or M (2 sec), revert to Main.

• S (< 2 sec) to save the setting and ﬂash the PO2 digits if Nitrox, or access Set Gas 3 if Air.

To set PO2, if ﬂashing -

• A (< 2 sec) to step upward through the Set Points of 1.00 to 1.60 one at a time in increments of 0.05.

• M (< 2 sec) to step back through the Set Points one at a time.

• S (< 2 sec) to save the PO2 Alarm setting and access Set Gas 2 (revert to Set Gas Lead-in after Gas 3).

• S (2 sec) to step back to Set Gas Lead-in.

• 2 minutes, or M (2 sec), revert to Main.

NORM/TECH SET ALM (ALARMS)

Unless noted otherwise, Alarm values set in one mode also apply to the other mode. Example: If the Audible is set OFF while in

NORM mode, it can then be set ON while in TECH mode.

SET ALM LEAD-IN, information includes (Fig. 30):

> Graphics Go To and ALM with SET icon.

• S (< 2 sec) to access Set Audible.

• A (< 2 sec) to step forward to Set UTL Lead-in.

• M (< 2 sec) to step back to Set GAS Lead-in.

• 2 minutes, or M (2 sec), revert to Main.

SET AUDIBLE ALARM, information includes (Fig. 31):

This feature is used to disable Audible Alarms and the associated LED, except during Violations. Setting it Off does not effect the

messages or ﬂashing that occurs when an Alarm strikes. It also does not affect FREE Mode Alarms (A300).

> Graphic AUD with SET icon.

> Graphic OFF (or ON) ﬂashing.

• A or M (< 2 sec) to toggle between OFF and ON.

• S (< 2 sec) to save the setting and access Set Depth Alarm.

• S (2 sec), if the Set Point is not changed, to step back to Set ALM Lead-in.

• 2 minutes, or M (2 sec), revert to Main.

SET DEPTH ALARM, information includes (Fig. 32):

This feature is not the same as the Delayed Violation depth alarm, or the FREE depth alarms (A300), described later.

> SET icon.

> Graphic OFF (or ON) ﬂashing, with Depth value last set with FT (or M) and MAX icons solid.

• A (< 2 sec) to step forward through the selections OFF, ON, and SET.

• M (< 2 sec) to step back through the selections.

• S (< 2 sec) to save the selection and access Set EDT Alarm if OFF or ON is saved, or ﬂash the Depth digits if SET is saved.

• S (2 sec), if the selection is not changed, to step back to Set Audible.

• 2 minutes, or M (2 sec), revert to Main.

If SET is saved and the Depth digits are ﬂashing >>

• A (hold) to scroll upward through the Set Points from 30 to 330 FT (10 to 100 M) in 10 FT (1 M) increments at 8/sec.

• A (< 2 sec) to step upward through the Set Points one at a time.

• M (< 2 sec) to step back through the Set Points one at a time.

• S (< 2 sec) to save the Depth value (solid) and ﬂash the graphic SET, allowing ON or OFF to be selected.

• S (2 sec), if the Set Point is not changed, to step back to Set Audible.

• 2 minutes, or M (2 sec), revert to Main.

Fig. 29 - SET GAS 2

(Gas 3 similar)

Fig. 30 - SET ALARMS

LEAD-IN

Fig. 31 - SET AUDIBLE

Fig. 32 - SET DEPTH ALARM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeris A300 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info