Bedienungsanleitung Aeris F11 (Seite 27 von 36) (Englisch)

618082

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

F11 OPERATING MANUAL

ALARMS

When the Audible sounds, the LED will ﬂash. Also, the Backlight will come On (if Off) for 10 seconds, and a ﬂashing icon or mes-

sage will be displayed as an indication that an event is occurring and as a reminder to view the display to identify the event.

When the Audible stops, the LED will extinguish and the message will clear.

If the Audible is set OFF, it will not sound and the LED will not ﬂash for any cautionary situation. Any icons or messages associated

with the condition will still ﬂash, and the Backlight will still come On.

------------------------------------------------------------------------------------------------------------------------------------------------------

WATCH CDT ALARM (Fig. 67)

When the Watch CDT reaches 0:00 (hr:min), the Audible will sound 3 sets of 3 beeps during which 0:00 and the CDT icon will

ﬂash on the Watch Main Time screen in place of Day of Week (or Dual Time).

WATCH DAILY ALARM (Fig. 68)

Each day at the time set, the Audible will sound 3 sets of 3 beeps during which the graphic ALRM will ﬂash on the Watch Main

Time screen in place of Day of Week (or Dual Time) and the alarm (speaker) icon will ﬂash.

LOW BATTERY ALARM, while in Watch Mode (Fig. 69)

When a Low Battery warning condition occurs (< 2.75 volts), the Battery icon (shell with inner bar) will be displayed solid on the

Watch Main Time screen.

When an Alarm condition occurs (< 2.50 volts), the graphics CHNG >> BATT will alternate on the Watch Main Time screen (each

on .750 seconds, then blank .250 seconds) until the battery is changed or the unit shuts Off due to insufﬁcient voltage.

------------------------------------------------------------------------------------------------------------------------------------------------------

FREE SURFACE CDT (COUNTDOWN TIMER) ALARM (Fig. 70)

When the CDT reaches 0:00 (min:sec), the Audible will sound during which 0:00 and the CDT icon will ﬂash on the Surface Main.

FREE SURFACE SRT (SURFACE RECOVERY TIME) ALARM (Fig. 71)

When Surface Recovery Time reaches the post dive surface interval time set (min:sec), the Audible will sound 3 sets of 3 beeps dur-

ing which the graphic SRT will ﬂash on the Surface Main screen in place of the graphic FREE or the CDT (if set for use).

LOW BATTERY ALARM, while in FREE Mode (Fig. 72, 73)

When a Low Battery warning condition occurs (< 2.75 volts) , the Battery icon (shell with inner bar) will be displayed solid on the

Surface Main screen.

When an Alarm condition occurs (< 2.50 volts), the graphics CHNG >> BATT will alternate on the Surface Main for 5 seconds

(each on .750 seconds, then blank .250 seconds), then operation will revert to Watch Mode with the graphics alternating on the

Watch Main Time screen until the battery is changed or the unit shuts Off due to insufﬁcient voltage.

------------------------------------------------------------------------------------------------------------------------------------------------------

FREE DIVE CDT (COUNTDOWN TIMER) ALARM (Fig. 74)

When the CDT reaches 0:00 (min:sec), the Audible will sound 3 sets of 3 beeps during which 0:00 and CDT icon will ﬂash on the

Dive Main.

FREE DIVE RTI (REPEATING TIME INTERVAL) ALARM (Fig. 75)

Each time the Repeating Time Interval set elapses while in Dive Mode, the Audible will sound (2) 2 second beeps during which the

graphic EDT will ﬂash on the Dive Main, in place of the CDT if in use.

FREE DIVE RDI (REPEATING DEPTH INTERVAL) ALARM (Fig. 76)

Each time the Repeating Depth Interval set elapses, the Audible will sound/ 3 sets of 3 beeps during which the graphic DPTH will

ﬂash on the Dive Main, in place of the CDT if in use. The alarm will sound even for descents made after ascents to shallower depths

are made.

RDI will not sound a alarms at the DA depths set.

FREE DIVE DEPTH (DA1 to DA6) ALARMS (Fig. 77)

Each time an alarm Depth is attained, during descent and/or ascent, the Audible will sound 1, 2, or 3 sets of 1 to 10 beeps (as set)

during which the graphic DA1 (or DA2 to DA6) will ﬂash on the Dive Main, in place of the CDT if in use.

Fig. 67 - WATCH CDT

ALARM

Fig. 68 - WATCH DAILY

ALARM

Fig. 69 - WATCH LOW

BATTERY ALARM

Fig. 70 - FREE SURFACE

CDT ALARM

Fig. 71 - FREE SURFACE

SRT ALARM

Fig. 72 - FREE SURFACE

LOW BATT WARNING

Fig. 75 - FREE DIVE

RTI ALARM

Fig. 76 - FREE DIVE

RDI ALARM

Fig. 77 - FREE DIVE

DEPTH ALARM

Fig. 74 - FREE DIVE

CDT ALARM

Fig. 73 - FREE SURFACE

LOW BATT ALARM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeris F11 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info