Bedienungsanleitung Aermec FCW 213V (Seite 37 von 118) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

587614

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

English

IFCW3LJ 1210 - 5375700_01

1 - ON/OFF

Turning the unit on and off.

2 - MODE

Press this button to set the various operating modes: automatic

(AUTO), cooling (COOL), heating (HEAT) and ventilation (FAN).

3 - SLEEP

Press this button to enable the night comfort function (SLEEP).

4 - KEY LOCK

Press the

and MODE buttons for 3 seconds to activate or

disactivate the key lock function.

The

LED will light up to show the key lock is activated.

5 - LCD DISPLAY

6 - FAN

Press this button to select the fan speed: automatic (AUTO), low

(LOW), medium (MED) and high (HIGH).

7 - TEMPERATURE (°C)

Temperature control (16 to 30 °C).

Use these buttons to set the temperature you wish to have in the

room,

to increase the temperature and to decrease it.

8 - TIMER

Timer control buttons (1 to 24 hours).

Use these buttons to set the time in hours,

to increase the time

and

to decrease it.

Programmed turning off: with the fan coil unit on it sets and displays the operation time before the programmed turn off.

Programmed turning on: with the fan coil unit off (but powered) it sets and displays the hours off before the programmed

turn on.

9 - SWING - HORIZONTAL BLADES

Press this button to control the vertical air flow. The first press starts the blades swinging. The second press stops the blades

in the current position. To re-start the blades swinging press the SWING button again.

➀

➁

➂

➃

➄

➅

➆

➇

➈

IMPORTANT

Note for FCW series with microprocessor controller:

- The two control types, wired control panel (PFW2) and remote control (TLW2), cannot be used at the same time on the

same fan coil unit.

– If the fan coil is off, all the previous settings made are kept in the memory except for the TIMER setting and SLEEP mode.

– If the fan coil is turned on using the (ON/OFF) key, the TIMER setting and SLEEP mode are cancelled.

PFW2 - WIRED CONTROL PANEL

LED Indications

Operating mode:

COOL Cooling

DRY Dehumidification

HEAT Heating

FAN Ventilation

Fan speed:

Display of the three fan speeds and the automatic control of

the speed:

AUTO Automatic speed control

HIGH High speed

MED Medium speed

LOW Low speed

Functions:

TIMER Timer function is activated

SWING Horizontal blades swinging

SLEEP Night comfort function activated

LOCK Keys are locked

LCD DISPLAY

Temperature (°C)

Displays the value of the temperature set point in °C (from

16°C to 30°C)

Timer (hour)

Displays the value of hours (Hr) of the timer, when it is

active.

With the fan coil unit on it displays the operation time

before the programmed turn off.

With the fan coil unit off (but powered) it displays the hours

off before the programmed turn on

DISPLAY ON THE WIRED CONTROL PANEL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aermec FCW 213V Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info