782361
28
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
22
SCOOPY+ S - User Manual
2.3.5. Recording/Playing audio files
This feature is optional on the SCOOPY+ S.
In mono operation, the SCOOPY+ S can record onto an SD card the mono "programme" signal. When
transmitting, the Program feedback is also recorded on a second track. The recordings have following
characteristics:
Linear 16 bits coding, regardless of the transmission coding format.
48 kHz sampling frequency (except if the recording is started while transmitting and encoding
at 32 kHz).
WAV file format: mono for an "offline" recording (without a network link at the time the
recording is started), 2-channel ("stereo") if the recording is started when a transmission is
already active. This format allows post-processing the files on all types of editing software.
Recording is not possible when operating in stereo mode.
A recording stored on the SD card can be played back by the SCOOPY+ S; in such case (in mono operation)
it becomes one more source mixed on the "Program" bus. The two audio signals played back are
injected on the mixing bus.
On demand, the SCOOPY+ S can send a recording to an FTP server.
The record/playback feature cannot be used along with the USB audio interface (see above).
A simple editing function is available: on a given recording, you can set a "begin" marker and an "end"
marker. This defines a virtual "take" that can be played like a "real" recording, but playing only the part
between the markers.
Several takes can be defined from the same recording.
It is possible to convert a virtual take into a real WAV file; this file will then add to the library of
recordings.
2.3.6. Mixing and routing
The audio sources are mixed for generating:
The program and coordination send signals.
The line outputs.
The output to the USB device port or the signal recorded on the SD card.
The headphone monitoring outputs.
The available sources are:
The mic/line inputs (MIC1 to MIC3).
The inputs from the USB device port or a file played from the SD card (SD PB).
The Program and Coordination feedback signals received from the network link.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aeta Scoopy plus S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info