782361
38
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
32
SCOOPY+ S - User Manual
2.5.6. Configuration and dialling memories
To ease the operation, it is possible to store configuration memories, called "profiles". These belong to
three categories:
"Call profiles", including the parameters for calling a given destination: dial numbers, coding
algorithm, etc. A profile is similar to a phone directory item, but in addition it can also hold
coding parameters. Recalling such profile directly configures the codec and/or triggers an
outgoing call with the parameters that have been previously stored by the user into this profile.
"Presets" which memorise the network access characteristics. Recalling a preset is a quick way
to recover the configuration needed for connecting on a given line/network.
"Snapshots" which memorise all the settings for the audio interfaces.
These various profiles can be used locally and also through the web pages, and they can be
imported/exported from/to a computer.
2.5.7. Test functions
For maintenance purposes, some test loops can be activated. The following drawing schematically
shows these test loops:
Figure 5 Test loops
"Audio loop": uncompressed audio data are looped from the input of the encoder to the input
of the output conversion functional block. This loop redirects the audio input to the audio
outputs;
"Loop 3", or "Codec" loop: compressed audio data are looped just before the network
interface;
Note: this test loop is not available for every network interface.
"Loop 2", or "Network" loop: this loop sends the received data back to the network; for the
remote codec, the effect is the same as a loop 3 when the transmission works correctly;
Note: this test loop is not available for every network interface.
"Audio feedback" loop (audio output to audio input); this allows the codec to send back to the
remote codec the signal it receives, after decoding and re-encoding.
Note: due to the location of the audio test points, the level indicators are not influenced by the test
loops.
Audio
inputs
Audio
outputs
Mixing
Conversion
Audio
monitoring
Conversion
Mixing
Encoding
Decoding
Transmission
interfaces Network
Audio
loop
Audio
loopback 3 2
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aeta Scoopy plus S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info