Bedienungsanleitung Aeta Scoopy plus S (Seite 61 von 136) (Englisch)

782361

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

SCOOPY+ S - User Manual

Notes:

 Default Protocol: this is the protocol used by default for setting an outgoing call. You can find

here the three possible AoIP session types: SIP (unicast), Direct RTP (unicast), or Multicast. SIP

is the standard choice, "Direct RTP" is a mode without signaling, used for instance for

compatibility with devices that do not support SIP.

 STUN Mode: enable or disable STUN. In this way you can disable STUN without erasing the

STUN server address.

 STUN Server: enter the address of the STUN server, either in numeric form or with a symbolic

name. This kind of server allows Scoopy+ S to discover its public IP address when it accesses the

Internet through a router with NAT. You can use AETA’s server: stun.aeta-audio.com.

 SIP Registration: enable or disable the registration on a SIP registrar server. The following

menus SIP xxx are used to enter the parameters of the account (or the accounts) on this

server, when using such service. These parameters should be provided by the administrator of

the SIP server. With this SIP Registration parameter, you can disable the registration and

hence stop using a SIP server, without having to erase account parameters; these stay ready for

later use.

 SIP Accept calls: when this box is checked, the codec accepts incoming SIP calls (regardless

whether the codec is registered or not on a SIP server). If it is not checked, incoming SIP calls

are rejected, with a "busy" indication.

 SIP User: enter the user ID as provided with the account. This field corresponds to a number

that a remote party can call to initiate a link with the codec when it is registered on the server.

If this field is left empty, the unit does not register on the SIP server.

 SIP Display Name: this (optional) parameter may be displayed by the remote agent during a

link; you can enter any text you wish. If this field is left empty, the actual value is the SIP URI of

the unit.

 SIP Registrar: URL of the SIP server, in case one is used. You can also enter a numeric IP

address.

 SIP Auth User: enter here the authentication ID as provided with the account. If this field is

left empty, the actual parameter is the same as the SIP User field, which is appropriate in most

cases.

 SIP Auth Password: password provided with the SIP account.

 SIP Outbound Proxy: IP address or domain name of a proxy server through which SIP

transactions and audio streams are relayed. This parameter is optional, to be filled only is such

server is used in the organization.

Note : contrary to the SIP registration data, this parameter is active even if "SIP Registration"

is disabled.

 Keepalive Interval: whenever necessary, the codec performs transactions to "keep alive" a

translation through a NAT router. This setting defines the maximum time left between two

transactions with the SIP server. It should be set on a value lower than the NAT translation time

out of the router.

 Min. Regist. Period : sets the interval between two re-registrations on the SIP server. Actually

the server always imposes a maximum period; therefore this setting is optionally used to make

the registration renewal more frequent, if its value is lower than the time set by the SIP server.

 SIP port: the default port for SIP signaling is 5060 (UDP), you can enter a different value here.

Note: this port number is valid for the SCOOPY+ S itself, not for the server. For the server side, if a

non-standard port is used, e.g. 5070, the "SIP Registrar" field must specify the port after a

colon like in "mySIPserver:5070".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeta Scoopy plus S Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info