Bedienungsanleitung Aeta Scoopy plus S (Seite 106 von 136) (Englisch)

782361

106

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

100

SCOOPY+ S - User Manual

5.10. "MAINTENANCE" tab

This tab leads to a selection between several pages dedicated to maintenance aspects.

5.10.1. "LOGIN DATA" page

This page is for setting the password for logging in the html pages. In a classic way, to set up a password

you must first enter the current one, then enter the new one and confirm it.

 Reminder: this password has no relationship with that for unlocking the restricted access on the

keypad/display front panel interface.

If you lose the password: using the front panel interface of SCOOPY+ S, perform a complete reset of the

settings, or a complete "factory reset". The passwords (front panel and html access) are then reset as

well as the other parameters in the unit.

You can also configure on this page the connection to an FTP server (used to upload recorded audio

files). The common parameters can be found: address or domain name of the server, username and

password.

Remember to save changes, clicking the relevant "Save" buttons!

5.10.2. "TESTS" page

This page provides the same choice as the Maintenance / Tests sub-menu (see in 4.4.8 and 2.5.7,

"Test functions", the description of the various test loops available).

 Do not forget to disable the test loops (setting "None") to come back to normal operation!

5.10.3. "SYSTEM UPDATE" page

This page allows you to upload a file into the unit and update the firmware.

The firmware update file must be provided to you by AETA (usually available for downloading from the

web site). The procedure is rather simple:

 First read carefully the instructions and warnings provided with the update file. In some cases,

you might have to do some preparatory action.

 From this "SYSTEM UPDATE" page, click "Browse…", find and select the update file.

 Click the "Update" button. The process begins, and a warning message is also displayed on the

SCOOPY+ S front panel.

 Wait for the completion of the update. Normally the unit should reboot by itself at the end of

the process.

 Usually the memorized settings are still valid after such update. However, for maximum safety

you can perform a complete "Factory reset".

This procedure requires maximum care, because such update always implies some risk. Please note

these additional recommendations:

 Beforehand backup/export the recorded profiles and snapshots, if you would like to use them

again afterwards.

 Make sure the link between the control computer and the SCOOPY+ S is stable (no interruption

should happen during the process).

 Make sure the SCOOPY+ S is not powered off and its Ethernet interface is not disconnected

during the process, do not use its keypad during the process.

 If needed, re-import your profiles, presets and snapshots after the update. But be aware that,

although we try to keep a maximum upward compatibility, AETA cannot guarantee the re-

usability and consistency of these memories after a firmware update.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeta Scoopy plus S Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info