Bedienungsanleitung Ag neovo PM-32 (Seite 45 von 51) (Englisch)

672387

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

9.2 Troubleshooting

Symptom Possible Cause Remedy

No picture is displayed 1. The power cord is disconnected.

2. The main power switch on

the back of the display is not

switched on.

3. The selected input has no

connection.

4. The display is in standby mode.

1. Plug in the power cord.

2. Make sure the power switch is

switched on.

3. Connect a signal connection to the

display.

Interference displayed on the

display or audible noise is heard

Caused by surrounding electrical

appliancesoruorescentlights.

Move the display to another location

to see is the interference is reduced.

Color is abnormal The signal cable is not connected

properly.

Make sure that the signal cable is

attachedrmlytothebackofthe

display.

Picture is distorted with

abnormal patterns

1. The signal cable is not connected

properly.

2. The input signal is beyond the

capabilities of the display.

1. Make sure that the signal cable is

attachedrmly.

2. Check the video signal source

to see if it is beyond the range

of the display. Please verify its

specicationswiththisdisplay’s

specicationsection.

Displayimagedoesn’tllupthe

full size of the screen

1. The zoom mode is not set

correctly.

2. Scan Mode may be set

incorrectly to underscan.

3. If the image exceeds the screen

size, Scan Mode may need to be

set to Underscan.

Use the Zoom mode or Custom

zoom function in the Screen menu to

netunedisplaygeometryandtime

frequency parameter.

Can hear sound, but no picture Improperly connected source signal

cable.

Make sure that both video inputs and

sound inputs are correctly connected.

Can see picture but no sound is

heard

1. Improperly connected source

signal cable.

2. Volume is turned all the way

down.

3. {Mute} is turned on.

4. No external speaker connected.

1. Make sure that both video inputs

and sound inputs are correctly

connected.

2. Press [

] or [ ] button to hear

sound.

3. Switch MUTE off by using the [

]

button.

4. Connect external speakers and

adjust the volume to a suitable

level.

Some picture elements do not

light up

Some pixels of the display may not

turn on.

This display is manufactured using

an extremely high level of precision

technology: however, sometimes

some pixels of the display may not

display. This is not a malfunction.

After-Images can still be seen

on the display after the display

is powered off. (Examples of

still pictures include logos, video

games, computer images, and

images displayed in 4:3 normal

mode)

A still picture is displayed for an over

extended period of time

Do not allow a still image to be

displayed for an extended period of

time as this can cause a permanent

after-image to remain on the display.

CLEANING AND TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ag neovo PM-32 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ag neovo PM-32

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info