12
Modifying the HEATING Programme
The heating programme has three pairs of ON/OFF
switching times per day. Each time can be set between
3.00 am and 2.50 am (on the next day) to allow you to
programme the heating to stay on past midnight if
required.
a. Move the slider switch to the HEATING position. ‘SET
HEATING’ will show briefly to verify this action.
b. Now follow the same procedure to set the times as
described in ‘Modifying the Cooker Programme’
(Page 11), Steps b. to i.
Exiting HEATING Programming Mode
To exit HEATING programming mode, move the slider to
the RUN position. This can be done at any time during the
programming process, and any changes made and
confirmed with the button will have been saved.
NOTE: If the unit is left in HEATING Programming mode
for more than 10 minutes without the slide being moved or
any buttons pressed, the message ‘MOVE SLIDER’ will
be displayed. Press a button to finish programming, or
move the slider to the RUN position.
Disabling/Enabling Time Periods (for
Heating and/or Cooker)
To disable any of the time periods ON 1 to OFF 1, ON 2
to OFF 2, or ON 3 to OFF 3, simply set the ON times and
its paired OFF time to the same time, and the programme
will just ignore them.
To re-enable the time period, simply set the two ON and
OFF times to be different.
Choosing the Operating Mode (for Heating
and/or Cooker)
The operating mode may only be changed when the slider
is set to the RUN position.
A green INDICATOR LAMP shows when the heating or
or cooker is switched ON.
Two MODE buttons are provided to select the Operating
Mode and therefore how the heating and cooker are
controlled.
Heating has four possible Operating Modes; these are
OFF, AUTO, ONCE, CONT. Pressing the heating MODE
button scrolls round these modes in sequence, and the
display indicates which mode is currently active.
l OFF Mode
The heating will remain OFF.
l AUTO (Automatic) mode
The heating will be switched ON and OFF according to
the heating programme.
l ONCE mode
The heating will come ON at the first programme ON
time, and go OFF at the last programmed OFF time.
l CONT (Continuous) mode
The heating will remain ON continuously.
The cooker MODE button operates in the same way as
described above for the heating MODE button.
Overriding the Operation Without Changing
the Programmes
In AUTO and ONCE operating modes, the OVERRIDE
buttons switch the heating or cooker ON or OFF without
altering programme.
When the indicator lamp is ON, pressing the OVERRIDE
button switches the heating or cooker OFF until the next
programmed ON time.
When the indicator lamp is OFF, pressing the OVERRIDE
button switches the heating or cooker ON until the next
programmed OFF time.
The Electronic Display will provide you with information
about the override.
Fig. 5 DESN 516079
Fig. 6 DESN 516080
Fig. 7 DESN 516081
OPERATING YOUR PROGRAMMER
