FLUE RESTRICTOR PLATE
There are two plates supplied. The flat plate with holes is
for burning solid mineral fuels and the similar plate with a
scoop is for wood logs only. This plate is fitted at the rear
of the firebox covering the flueway opening and is to be
used when burning a specified fuel only. Do not use
the plate with the scoop when burning solid mineral
fuels. This part can only fit one way round. When
burning wood, fit this part before the grate plates and
firebricks.
GRATE PLATES
Three plates are supplied with the cooker and are fitted
over the grate bars when burning wood only. Do not
use these when burning solid mineral fuels. Fit the
plates, with the return edge downwards, evenly front to
rear. The grate plate will have the effect of locking the
riddling mechanism so when burning wood riddling is not
necessary. Position the riddling handle centrally in its slot
to align the grate bars before fitting.
This appliance has been tested using manufactured
briquetted smokeless fuel (Taybrite and Ancit) for closed
appliances sized between 20g and 140g. Other fuels are
commercially available and may give similar results.
WARNING: HOT SURFACES, use the tool supplied to
operate this appliance. It is recommended to use the
heatproof glove supplied when raising the dome lids to
use the hotplate. Replacement gloves can be obtained
from the Aga Shop.
Fig. 2
Fig. 3 Both Flue Restrictor Plates
Fig. 4 Wood Setup
Fig. 5 Solid Mineral Fuel Set-up
2
