Bedienungsanleitung Agfa AS1150 (Seite 35 von 212) (Englisch)

521798

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

4 Wait until the control lamp h and STATUS

are no longer flashing and STATUS is contin-

ually on. This means that the scanning process

is completed and the data was saved onto the

memory card.

Insert film / slides

Scanning documents with the protective cover

1 Verify that there are not any documents in the

document feed. Push the document guide

rightmost.

2 Place the film guide on the designated grooves

in the document feed.

3 Carefully slide the film guide all the way into

the document feed. Be careful not to damage

the metal rails in the film guide.

4 When the film guide is inserted correctly, it

snaps into place and the device starts the cal-

ibration process.

5 Wait until the control lamps are no longer

flashing.

6 Remove the negative film/slides from the pro-

tective case/bag.

7 Verify that they are in the correct position for

insertion.

8 Hold the negative film such that the labelling

(number) of the negative is legible (not re-

versed) and the upper side of the image is fac-

ing in the direction of the activation key.

9 Insert the negative film / slide into the film

guide.

10 Insert the negative film / slide into the film

guide far enough so that it is automatically fed

in and the scanning process starts. Be careful

not to bend the negative film / slide. The con-

trol lamp h flashes during the scanning proc-

ess.

11 Wait until the control lamp h and STATUS

are no longer flashing and STATUS is contin-

ually on. This means that the scanning process

is completed and the data was saved onto the

memory card.

12 Return the scanned negative film / slides to

the protective case / bag in order to avoid

damage or contamination.

13 The file name is assigned according to the DCF

(Design Rule for Camera File System) standard.

Notice

Removing documents from protective

cover

Remove the document from the pro-

tective cover after the scanning proc-

ess in order to avoid the document

sticking to the protective cover.

Notice

Suitable documents

• 35mm colour negative film

• Unframed slides

• 35mm black/white negative film

• Automatic rotating and mirroring of the

photo:

The scanner automatically recognises

the orientation of the negativ film when

the printed numbers on the edge are in

the same orientation as the photo. If the

numbering cannot be identified, this

function is deactivated.

CAUTION!

Unsuitable Documents!

No glue residue or stickers should be

present on the edge of the negative.

Only unframed slides can be inserted.

CAUTION!

Damaged negative film ends

If the negative film ends are damaged

(not cut evenly, folded), cut the film

evenly and removed the folded corners.

Notice

Handle the negative carefully

Handle the negative with care. If pos-

sible, wear cotton gloves.

Notice

Scanning speed

Due to the higher resolution when

scanning negatives / slides, the scan-

ning speed is slower than when scan-

ning photos.

as-1150-manual-03-uk-253354001-a.book Seite 7 Dienstag, 7. September 2010 2:33 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Agfa AS1150 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info