Assembly and Operating Instructions Ver. 3 01/2014 (2284)
9
GENERAL DESCRIPTION ctd.
1. Backrest
There are two types of backrest fitted to the wheelchair, either fixed or
adjustable. The adjustable backrest can be folded down by means of a
locking mechanism fitted to both sides of the lower part of the backrest
pillars. To fold the backrest down, push on both of the black plastic levers,
then pull back and down on the top part of the backrest. To return to the
original, reverse the procedure, making sure the mechanisms are locked
securely.
2. Handles
The handles are designed for the helper to propel the wheelchair. They
must not be used solely for lifting the wheelchair over obstructions or
kerbs (see negotiating obstacles)
3. Armrest
PVC pads are fixed onto the armrest for comfort and can be replaced as
spare parts.
4. Seat Upholstery
Periodically check the upholstery for signs of tears or sagging. Replace
immediately if the seat is damaged. Remember: the seat upholstery is the
primary weight – supporting material.
5. Footplates
The footplates are intended as a foot support only when you are sitting in
the wheelchair. On no account should you stand on the footplates. The
heel loops or calf straps (if fitted) can be used to secure the position of the
feet. The footplate assemblies can be adjusted in height by loosening the
nut of the base of the adjustment tube, positioning the plate at the
required height and tightening the nut to secure the assembly.
The footplate supports cannot be adjusted but are moveable from the
wheelchair. They can be swung away to the outside of the wheelchair. To
carry out this procedure, press the release lever and swing the support to
the outside of the wheelchair. If the support is to be removed, lift it
upwards. To re-fit and return to the original position, reverse the above
procedure.
