1. Connect the cable.
Connect one end of the supplied AC adapter to the USB
port of the projector and the other end to a wall outlet.
OR
Connect one end of the supplied USB cable to the USB
port of the projector and the other end to a powered
PC. Make sure the projector is powered off.
2. The charging LED turns orange and the charging
starts.
3. When interrupted the LED went off.
Charging status Charging time
Powered OFF, charged by AC adapter around 3 hours
Powered OFF, charged by USB around 6 hours
Powered ON and connecting with AC
adapter
no charging
Powered ON and connecting with USB no charging
When using a PC to charge the battery, do not turn on the projector, or the
charge will stop.
Charging the battery
1. Slide the battery cover open.
2. Place the Li-Ion battery into
the compartment. Note that
the metallic contacts must be
aligned with the contacts in the
compartment.
3. After the battery is properly
installed, replace the battery cover.
Installing the battery
Reading LED indicators
The Power LED is lighting orange when projector is charged.
The Power LED is lighting green when connected with AC power adapter in standby
mode or the battery is fully charged.
