Bedienungsanleitung Air and Me Evel (Seite 7 von 23) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Finnisch)

807097

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

1. Plug the appliance.

• All luminous indicators of the control panel light for 1 second and then turn off.

• At the same time, the appliance produces 3 sound signals.

• When the appliance operational, the “Power” luminous indicator turns red.

2. Press the ON/OFF button ( A) to turn the appliance on. The movable ap opens.

3. Press the ON/OFF button (A) again to turn the appliance off.

• The “Power” luminous indicator turns red and the other luminous indicators turn off.

• The appliance continues to ventilate the air during 4 minutes after being turned off, then

the movable ap comes back to its initial position and the appliance stops completely.

Useful: the appliance retains the last settings from one use to another.

OPERATING INSTRUCTIONS

MAIN FUNCTIONS

D “SPEED” BUTTON: By pressing this button several times, you can adjust the air flow produced

by the appliance, selecting one of the three modes: LOW (low air flow), MED (medium air

flow) or HIGH (strong air flow).

E “TIMER” BUTTON: By pressing this button several times, you can select the operating time: 2

hours, 4 hours or 8 hours. By pressing it one more time, you can cancel the Timer function and

choose to let the appliance work continuously.

F “HUMIDITY” BUTTON: By pressing this button several times, you can choose the humidity rate

between three options: HygroSmart®, 60 % or 70 %.

• The HygroSmart® function ( G) enables you to maintain an ideal humidity rate in the air

(between 40% and 60%). The indicator light flashes if the humidity level in the ambient air is

already below 40%.

• Adjust the appliance on 60% if you want to use it in a cellar.

• Adjust the appliance on 70% if you want to use it in a wine cellar.

When the ambient air humidity is lower than the set humidity level, the appliance stops

dehumidifying, but its fan continues to operate. If the ambient humidity is higher than the

sethumidity level, the appliance automatically restarts dehumidifying.

It is possible to combine these three modes at the same time: choice of speed, choice of

dehumidification time and choice of humidity rate.

H “CLOTHES DRYER” BUTTON: By pressing this button, the appliance works at maximum speed.

It is possible to adjust the Timer and to define the desired humidity rate but it is not possible

to adjust the speed.

If you do not adjust the Timer, the appliance will work for 10 consecutive hours, will stop half

an hour to avoid overheating and then will automatically restart.

I “MOVABLE FLAP” BUTTON: Thanks to this button, you can control the switching on and the

stop of the movable flap. By pressing this button, the flap opens automatically. You can

adjust the opening angle of the flap by pressing it a second time. The movable flap can be

opened up to an angle of 90°.

1 Handle

2 Digital display

3 Air outlet

4 Continuous drainage hole

5 Water tank lid

6 Float

COMPONENTS (SEE PAGE 2)

7 Water tank

8 Filling the tank indicator

9 Removable lter

10 Air inlet

11 Built-in hygrometer

12 Electric cable

DIGITAL DISPLAY (SEE PAGE 3)

A ON/OFF button

B “In process” luminous indicator

C “Full tank” luminous indicator

D “Speed” button

E “Timer” button

F “Humidity” button

G “HygroSmart®” luminous indicator

H “Clothes dryer” button

I “Movable ap” button

EMPTYING THE TANK (SEE PAGE 3)

The appliance automatically stops working once the tank is full and the “Full” indicator ( C) lights.

If you had set the Timer, the appliance retains the remaining operating time. After having emptied

the tank, the appliance resumes the current program.

1 Turn the appliance off and pull the tank.

2 Unclip the water tank lid.

3 Empty the condensates.

4 Replace the tank lid and then replace the tank. Then, press the ON/OFF button and choose

the desired operating mode.

The dehumidifier is equipped with a tank positioning sensor. As a matter of security, the product

turns off if the tank is missing or not properly placed and the “Power” and “Full” indicators light.

USE PRECAUTIONS

• Make sure that the product is placed on a dry flat surface.

• Leave at least 50cm behind, around and in front of the appliance.

• Make sure the removable filter and the tank are properly positioned and pushed in.

• Do not remove the float from the tank because it will prevent the appliance from starting.

12 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Air and Me Evel Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info