Bedienungsanleitung Air and Me Polair (Seite 8 von 19) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

807115

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

14 15

MAIN FUNCTIONS

[ SPEED ] BUTTON

To choose the 3 ventilating speeds in: LOW – MEDIUM – HIGH order. The led light turns on

according to your choice (show on the digital display c, d, e).

[ OSC ] BUTTON

Press the button ( C) to start and stop the oscillation (show on the digital display f).

[ MODE ] BUTTON

Press the button ( D) to choose the 2 ventilation modes. Press one time for NATURAL WIND

MODE and a second time for NIGHT MODE. Press a third time to disable and being in

normal mode.

– NATURAL WIND MODE: This function creates a breeze like a natural wind. It alternates

different ventilation cycles. When the mode are turns on you can choose the intensity in

changing the speeds:

• LOW Breeze: For an alternating of 75 sec ventilating cycles principally in a LOW speed

(show on the digital display a + c).

• MEDIUM Breeze: For an alternating of 75 sec ventilating cycles principally in a MEDIUM

speed (show on the digital display a + d).

• HIGH Breeze: For an alternating of 75 sec ventilating cycles principally in a HIGH speed

(show on the digital display a + e).

– NIGHT MODE: The LEDs of the digital display turn off and the speed ventilation decrease

progressively according to the start speed. Such as:

• With a LOW departure speed: still works in LOW speed (show on the digital display b

+ c).

• With a MEDIUM departure speed: the product works in MEDIUM speed during a half

hour and then still works in LOW speed (show on the digital display b + d).

• With a HIGH departure speed: the product works in HIGH speed during a half hour then

in MEDIUM speed during a half hour and still works in LOW speed (show on the digital

display b + e).

[ TIMER ] BUTTON

The product is equipped with a timer. You can program his stop from 1 hour to 8 hours. Press

several times the botton until the time appeared. (show on the digital display E).

ADDITIONAL FUNCTIONS

INSIDE DRYING OF THE APPLIANCE

Press the [TIMER] button during 3 secs for turn on the drying principal filter mode. This drying

works in HIGH speed during 20 min and stops. During this mode only the [ON/OFF] button works.

• Make sure the unit is turned off and unplugged before any manipulation.

• Do not immerse the device in water or any other liquid.

• Do not use corrosive, abrasive or ammable products to clean the unit.

CLEANING THE FILTER

It’s recommended to clean the principal filter every 2 months (more often if it’s visibly dirty) the

dust accumulation could reduce the air flow.

1. Unplug the product.

2. Remove the filters in pulling in the 2 fixings.

3.Clean the principal filter with a soft detergent and a soft brush.

4. Be aware to replacing the principal filter entirely dry.

STOCKAGE

To avoid any bacteria or virus proliferation, never store the appliance with water

inside the tank and be sure that the appliance is perfectly dry.

1. Empty and clean the tank.

2. Dry the main lter using the INSIDE DRYING function.

3. Store the product in a place that is protected against dust and that is clean and dry.

MAINTENANCE

FAQ

Problem Reason Solution

The appliance

does not work

> The product is not correctly

plug or there is an electrical

problem. > Plug the socket correctly and

check the voltage and the good

functioning of your electrical

system.

> There is a problem on the

electrical system of your

house.

Drop in the

appliance

performance

> The air inlet or outlet is

blocked by something.

> Leave at least 50 cm space

behind, on the sides and in front

of the unit.

Abnormal noise

> Something obstructs the

fan. > Make sure that no object

obstructs the air ow.

> The device has a

functioning problem. > Contact your reseller for service

support.

The air coming

out of the

appliance smells

bad

> The water in the tank

is dirty (stagnant or

contaminated).

> Empty the tank and wash and dry

both parts before turning the unit

on again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Air and Me Polair Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info