Bedienungsanleitung Air and Me Rohan (Seite 11 von 49) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

807116

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

20 21

OPERATING INSTRUCTIONS

MAIN FUNCTIONSCOMPONENTS (SEE PAGE 2)

CONTROL PANEL (SEE PAGE 3)

1. Plug the appliance.

• All luminous indicators of the control panel light for 1 second and then turn off.

• At the same time, the appliance produces a sound signal and the movable ap opens

and then closes.

• When the appliance is operational, the digital display indicates the ambient humidity rate.

2. Press the ON/OFF button ( L) to turn the appliance on. The movable ap opens and the fan

turns on at low speed [ LOW ].

3. Press the ON/OFF button again to turn the appliance off: the movable ap comes back to

its initial position and the appliance stops completely.

A [ TIMER ] BUTTON

• By pressing this button several times, you can select the operating time from 1 to 24 hours.

A long press of the button allows you to quickly scroll through the numbers on the screen.

• Once the operating time is set, you can release the button: the digital display indicates

the ambient humidity rate, the luminous indicator of the [ Timer ] button lights and the

dehumidifier turns on. It automatically stops at the end of the preset time.

• To deactivate this function, press the button twice in a row when the digital display

indicates the ambient humidity rate.

B [ INSIDE DRYING OF THE APPLIANCE ] BUTTON

• By pressing this button, you can start the procedure for the inside drying of the dehumidifier:

the luminous indicator lights and the digital display indicates [ CL ]. This process of drying

is very useful before long time storage because it prevents the formation of mould inside

the appliance.

• The process takes about 1 hour:

– The dehumidifier starts in high air speed (HIGH) and releases air continuously for 30

minutes.

– Then, the dehumidifier works in a lower air speed (LOW) for 20 minutes.

– Finally, the appliance comes back in “standby” mode.

• To deactivate this function, press the button again: the luminous indicator turns off.

D [ SPEED ] BUTTON

By pressing this button several times when AUTO or CONTINUOUS modes are selected, you

can adjust the air flow produced by the appliance selecting between one of the two

modes: LOW (low air flow) or HIGH (strong air flow).

G [ HUMIDITY RATE ] BUTTON

• By pressing this button several times, you can define the humidity rate of the air that you

want to reach between 30 and 80% (the adjustment is made in 5% steps).

• When the ambient air humidity is lower than the preset humidity rate, the appliance

stops working. When the ambient air humidity is higher than the preset humidity rate, the

appliance automatically restarts.

Be careful, this function is only available in AUTO mode.

I [ MODE ] BUTTON

This button enables you to choose between two operating modes:

• AUTO Mode: If the humidity rate in the air is higher than the preset rate, the compressor

starts and the fan runs at the preset speed.

On dehumidifiers ROHAN with serial number CF01591 or earlier, if the humidity level in the

air is lower than the preset level, the compressor stops and ONLY the fan runs.

On dehumidifiers ROHAN with serial number CF01652 or later, if the humidity level is lower

than the preset level, the compressor AND the fan will stop.

• CONTINUOUS Mode: Regardless of the humidity rate in the room, the compressor starts

and the fan runs at the preset speed.

Be careful, the build-in hygrostat in the appliance has a margin of error of ± 5%.

1 Movable ap

2 LED bar

3 Air outlet

4 Water tank lid

5 Water tank handle

6 Water tank

7 Water level control

8 Handle

9 Control panel

10 Front side of the appliance

11 Rear side of the appliance

12 Removable pre-lter

13 Plug of the continuous drainage hole /

Lift pump outlet

14 Power cord storage

15 Multidirectional casters

16 Power cord

17 Continuous drainage hose (60 cm)

18 Lift pump hose (2 m)

A [ Timer ] button

B [ Inside drying of the appliance ] button

C [ Movable ap ] function

D [ Speed ] button

E Full tank indicator

F Digital display

G [ Humidity rate ] adjustment button

H [ Lift pump ] function

I [ Mode ] button

J [ Child safety ] button

K [ LED display ] function

L ON/OFF button

M Wi-Fi connection indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Air and Me Rohan Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info