Bedienungsanleitung Airpress 36821 (Seite 32 von 56) (Deutsch, Englisch, Holländisch, Französisch)

594049

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

2.3 Safety devices

• Pressure switch (fig. 5): adjusts both STOP and START pressure.

• Safety valve: after reaching the max. pressure value it releases the air off.

Compressors with single-phase electric motor are equipped with overload

cut-out (fig. 6) which operates as a safety device in case of motor overload.

When the motor overheats because of any fault arisen, the overload cutout

automatically releases and cuts off power, thus preventing the motor from

being damaged. Wait a few minute (about 5) before resetting the device, then

restart the motor.

It you restart the compressor and the overload cutout releases again, turn the main

switch to position (0) unplug the equipment and contact any Authorized Service

Centre.

Compressors with three-phase electric motor are equipped with remote pressure

switch (Fig.5), i.e. the overload cutout into the remote pressure switch operates to

protect the motor, and stops the compressor in case of motor overload by turning

automatically the starter switch to position (0). In that case, cut off power and manually

reset the thermal relay inside the electric box (Fig.6A).

If you restart the compressor and the device releases again, turn the main switch to

position "0" OFF, and contact any Authorized Service Centre tor correct relay setting

and, if necessary, for any adjustments.

• Exhaust solenoid valve: when the power is cut off, the solenoid valve opens and

releases all the air in the head of the compressor unit and in the delivery hose.

2.4 Standard accessories supplied (Fig. 3)

The following accessories are supplied together with the compressor:

a. Operation and Service Manual + information table,

b. anti-vibrating feet,

3. SAFETY GENERAL WARNINGS

3.1 General information

• Your compressor was thought, manufactured and arranged tor being

used as a compressed air source solely, according to the safety

instructions described hereunder.

• Several pneumatic accessories can be connected to your compressor.

For a proper use, refer to their single user's manual.

• Before operating your compressor or performing any operation read this Manual

very carefully.

• Any change, tampering or different use from what reported in the instruction

manuaI is forbidden. The Manufacturer assumes no responsibility tor any damages

resulting from improper use or noncompliance with the instructions described in

this manual.

• Before carrying out any service operation to your compressor, ensure the power

has been cut off by turning off the main switch and the wall switch (when supplied).

3.2 What YOU MUST DO:

Check that mains voltage is the same as voltage written on the EC plate.

Learn how to stop the compressor suddenly

and how to use all controls.

Before carrying out any service operation

the compressor tank must be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Airpress 36821 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info