28958

Airtronics MX3 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
SYSTEM FEATURES
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
We appreciate your purchase of this new Airtronics
MX-3 Radio Control System. These instructions are
intended to familiarize you with the many unique
features of this modern, state of the art equipment.
Please read them carefully so you may obtain
maximum success and enjoyment from
its operation.
Please note that the MX-3 is designed for comfort and
precise control of all types of model cars and boats.
We wish you the best of success with your
radio system. Enjoy and have fun.
MX-3
Unique and functional pistol grip transmitter design
Well balanced for precise control
Non-slip rubber steering wheel
Well placed digital trim levers
Optimum third channel switch location
Big LCD display
Adjustable (70/30) Throttle trigger
Low Battery warning
Quick access transmitter crystal
High performance micro 3 channel receiver
High torque / high speed 94102Z servo
Receiver dry battery holder
Switch harness
NiCd charger jack in transmitter
Wrist strap holder (optional wrist strap part # 99104 )
Sound Beep ( On / Off )
Digital Trim indicators (throttle and steering)
Battery Fuel Tank
Dual Rate Steering
EPA Steering, Throttle, AUX
ARC Steering, Throttle
Model Memory (5)
Sub-Trim Steering, Throttle
Servo Rev Steering, Throttle, AUX
Battery Voltage Display
Audio On / Off
Screen Display
SYSTEM SPECIFICATIONS
Model:
Output power:
Modulation:
Power supply:
Weight:
Frequencies:
MX-3
200 MW
FM/PPM
8 AA alkaline dry cells DC 12V or
8 cell NiCd Pack.
14.46 ounces
27 MHz (6) frequencies
75 Mhz (30) frequencies
Transmitter
Model:
Modulation:
Intermediate frequency:
Power supply:
Weight:
Dimensions:
92837Z (27 MHz) or
92836Z (75 MHz)
FM/PPM
455 KHz
DC 4.8 ~6.0V
0.67 ounces
1.65”(L) x 1.06”(W) x 0.57”(H)
Receiver
Model:
Power supply:
Dimensions:
Weight:
Speed:
Torque:
94102Z Heavy duty standard servo
DC 4.8 ~ 6.0V
1.54”(L) x 0.79”(W) x 1.42”(H)
1.59 ounces
0.16 sec. At 6.0V for 60 deg rotation
53 in/oz at 6.0V
Servo
97001Z switch harness
Frequency flag
Receiver dry battery holder
instruction manual
Accessories
95046Z Transmitter NiCd Battery Pack ( 700mah )
95033Z NiCd Dual Battery Charger TX and RX
96317Z F3000 speed controller (no reverse)
99104 Deluxe wrist strap
Options
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
5
9.8
V
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
ST TH AUX
5
NOR
Battery
Servo Reverse
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
ST TH
5
0
Sub Trim
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
5
5
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
ST TH
5
0
Model Select
Arc
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
ST
5
%
90
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
ST TH AUX
5
%
100
End Point Adjustment
MODEL
BATT
REV
ARC
SUB-T
MODEL
EPAD/R
TH
H
L
L R
ST
ST TH AUX
5
%
100L
Steering Dual Rate
LCD DISPLAY SCREENS
Pressing both menu buttons simultaneously, will
automatically move the cursor to the battery voltage screen.
Low battery warning beep will come on when battery reaches
9.1V
Press the left menu key to move the cursor to the REV
screen. The screen will now display AUX. Change the servo
direction by pressing (INC or DEC) key for the AUX channel.
By pressing the left menu key again, you can change the
TH and ST directions.
Press the left menu key to move the cursor to the SUB-T
screen. The screen will now display TH. Adjust the sub-trim
by using the (INC or DEC) key. Press the left menu key to
display the ST and adjust using the (INC or DEC) key.
Press the left menu key to move the cursor to MODEL.
The screen will now display the model number you are
currently using. To change models, press the (INC or DEC)
key to select model 1 ~ 5.
Press the left menu key to move the cursor to ARC.
The screen will now display TH. Adjust the ARC by pressing
the (INC or DEC) key. Press the left menu key to adjust the
ST. (NOTE) Steering ARC will work in both left and right
directions. Throttle ARC only works in forward direction.
Press the left menu key to move the cursor to EPA. The screen
will now display AUX (L) or (R). Buy moving the AUX channel
lever, you will see the (L or R) change. EPA can be set for
both directions. To set TH, move trigger forward or back
to see (H or L). Move steering wheel to see (L or R)
Press the left menu key to move the cursor to EPA.
The screen will now display ST. This will display your current
Steering Dual Rate setting. You can change this setting by
using the (INC or DEC) keys or, by moving the D/R lever located
above the steering wheel.
Default
ST
TH
AUX
NOR
NOR
NOR
Default
ST
TH
0
0
Default
ST
TH
0
0
Default
ST
TH
AUX
100%
100%
100%
Default
ST
100%
Range 0% ~ 120%
ST: Range 0% ~ 120%
Range - 100 ~ 100
Range 1 ~ 5
Range +15 ~ -15
AUDIO ON / OFF Beep
By default the audio sound beep is in the on position. This beep will sound out every time
you press any of the input or trim keys. You can turn the audio off by:
1. Turn radio power switch to the off position
2. Press the INC key down and hold.
3. Turn power switch to the on position
4. Release the INC key.
To turn the audio sound on, repeat steps 1 ~ 4.
NOTE: When audio sound is “ON”, there will be no icon displayed in the lower left of the display screen.
Audio off
icon
Audio off icon
0
R 100
L 100
Servo Movement
Negative Steering ARC
Faster servo movement
in center, slower after
ARC percentage
Stick Movement
0
R -100
L -100
0
R 100
L 100
Servo Movement
Stick Movement
0
Positive Steering ARC
Slower servo movement
in center, faster after
ARC percentage
R -100
L -100
0
L 100
H 100
Servo Movement
Negative Throttle ARC
Faster servo movement
in center, slower after
ARC percentage
Stick Movement
0
H -100
0
L 100
H 100
Servo Movement
Stick Movement
Positive Throttle ARC
Slower servo movement
in center, faster after
ARC percentage
H 100
0
Antenna
Fully extend antenna before operating
Steering Dual Rate
Move lever left to increase and right to decrease
Digital Steering Trim
Digital Throttle Trim
Channel 3 (AUX)
Crystal
Power Switch
LCD Display
Wrist Strap Support
NiCd Charging Inlet
Menu Keys
Increase / Decrease Keys
Trigger 70,30
70% High, 30% Low. Adjustable
ARC Steering ARC Throttle
MX-3
DIGITAL CONTROL SYSTEM
+
-
INC / DEC
MENU
TH-L: Range 0% ~ 160%
AUX: Range 0% ~ 150%
TH-H: Range 0% ~ 140%
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Airtronics MX3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info