6
NiCd BATTERY CHARGING INFORMATION:
In order to protect the charging circuit in your RD6000 Sport transmitter, a diode has been installed to
protect it from some of the high discharge rate “cycler’s” on the market. We recommend that you charge
the transmitter battery (while installed) with the supplied ATX charger, Part # 95033.
Should you wish to “cycle” or discharge the transmitter battery, you must first remove it from the transmit-
ter. This allows you to bypass the protective diode.
The following two Airtronics service items will allow you to “cycle” your RD6000 Sport transmitter battery.
See your local dealer for these items.
(1) #99704 Transmitter Charging Plug with Cable for use with your cycling device (black wire w/white tracer
is positive.
(1) #97051 Transmitter Battery Cycling Adapter Cable.
Above items will also work with Airtronics Quasar, Radiant, and Vanguard transmitter batteries. Airtronics
does NOT recommend the use of any fast or quick chargers.
RD6000 SPORT TRANSMITTERS FEATURES
The RD6000 Sport narrow band PPM/FM computer radio control system is designed for the use by power
model, sailplane, and helicopter pilots who demand a quality product. The RD6000 Sport is packed with all
of the capabilities that the beginner as well as the more advanced modelers demand for all three types of
flying. It has the features available to get the most out of any type of model.
Program Features for all types of models
4 Model Memory
Stop Watch
Digital Trims
Servo Reversing on all channels
Dual Rate on Elevator and Aileron channels
(Plus Rudder on Helicopter)
Large Screen Liquid Display (LCD)
End Point Adjustment on all channels
Model Type selection
Center Adjustment on EL, AL, TH, RU, and P-F
Data Reset
LCD Transmitter Voltage Meter
High Capacity Transmitter/Receiver NiCd
Batteries
Adjustable Stick Tension and Length
Low Battery, High Throttle and Power Alarms
