Bedienungsanleitung Airtronics RD6000super (Seite 13 von 75) (Englisch)

28962

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

RD6000 Super AERO FEATURES

FEATURES

STW (Stopwatch)

REV (Reverse)

D/R (Dual Rate)

CNT (Center)

TRM (Trim)

EXP (Exponential)

EPA (End Point Adjustment)

M-SL (Model Select)

MOD (Modulation)

TYP (Type of Model)

INT (Integral Timer)

RST (Reset)

CLK (Click)

NAM (Name)

SW-R (Switch Reverse)

CPY (Copy)

FLAPE (Flaperons)

DELTA (Elevons)

V-TAIL (Rudder and Elevator)

D/A-A (Dual Rate Alarm)

DESCRIPTION

Used as a stopwatch or to

countdown to a preset time.

Reverses the servo operating

direction.

Adjusts servo throw. Available on

Elev and Ail.

Changes servo neutral position.

The LCD provides an indicator of

the value, as well as the direction of

the trim.

Changes the linear movement of the

servo to the relation of the stick

movement. Can be set Positive or

Negative.

Limits the total movement of a servo

in each direction.

Select models 1, 2, 3, 4, 5, 6, 7, 8.

Transmitting Modulation PPM/FM,

PPM/Reverse FM, PCM1, PCM2.

Model Type Aircraft or Helicopter.

Used to show how long the

transmitter has been in use. Can be

reset to zero.

Clears all setup data in any model to

factory default settings.

A beep sound can be heard every

time you press a transmitter key.

Options Active or Inoperative.

You can use up to 3 characters to

name your model.

You can reverse to default direction

of all control switches.

Copy one model to another.

Activates 2 channels to be used for

Ailerons.

Ailerons operate as ailerons and as

well as Elevators. Used for flying

wings.

Used for V-Tail models.

Alerts you when a Dual Rate switch

is on. Options On or Off.

T-CUT (Throttle Cut)

C-MIX (Compensation Mixing)

E>F (Elevator to Flap Mixing)

R>A (Rudder to Aileron Mixing)

R>E (Ruder to Elevator Mixing)

F>E (Flap to Elevator Mixing)

SPOIR (Spoilerons)

AI-DIF (Aileron Differential)

L-DIF (Landing Differential)

CR:LA (Crow Left Aileron)

CR:RA (Crow Right Aileron)

OPT (Option Menu)

Step (Trim Step)

FAIL (Fail Safe)

B-F-S ( Battery Fail Safe)

BASIC ( ON/OFF )

You can set the point where the

throttle can be cut using the

throttle cut-off button.

Ability to mix a master channel to

another slave channel with a C-

Mix Switch.

Ability to mix Elevator to Flap.

Ability to mix Rudder to Ailerons.

Ability to mix Ruder to Elevator.

Ability to mix Flap to Elevator.

For sailplanes. Both aileron will act

as spoilers as the throttle stick is

used.

Changes the total amount of throw

up and down to both aileron

servos independently to help stop

a bad yaw.

Allows Aileron control to remain

effective when Crow or Spoilers

are used (Sailplane)

Crow is used to slow the sailplane

down. Ailerons go up when flaps

go down. Lt and

Right Ailerons are adjustable

Advanced program allows you to

turn off or on function displays.

Sets the amount of movement a

servo will move with one beep of

the trim.

You can preset a default control

input when aircraft loses it’s signal

from the transmitter. Only works

with a PCM receiver.

Will bring the throttle servo to idle

when the airborne battery reaches

a predetermaned low voltage. Only

works with a PCM receiver.

Turn Basic menu on or off

FEATURES DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Airtronics RD6000super Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info