28962
26
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
26
On the previous screen, the destination has been set to Model #3. MAKE CERTAIN that this model setup is not one
you wish to save, because when you copy the Model #1 set-up into Model #3, all data that was in Model #3 is
replaced with the Model #1 data! At this point Model #3 data is still intact, so if you wish to change the destination for
the copied data, do so before proceeding.
Having selected both the data source (Model #1) and the desired destination (in this example Model #3), you can now
proceed to confirm the copy function.
Press the CH + > key to access the next screen as shown below. The “YES” will be blinking.
Press the INC +/YES key to confirm your data copy function. The screen will change to the following screen to inform
you that the process has been completed, and that Model #1 and Model #3 now have the same data, (in this example
Model #1).
Press the END key to return to the CPY select screen.
i
i
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Airtronics RD6000super wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info