Bedienungsanleitung Aiwa AWPZX7 (Seite 15 von 40) (Englisch)

29694

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Tuner

Other operations

To improve tuner reception

When tuner reception is poor, set CD player

power off by CD power manage function.

CD power is factory set to on.

1 Press FUNCTION repeatedly to switch the

function to CD.

2 Press ?/1 to turn off the system.

3 Press ?/1 while holding x on the unit.

“CD POWER OFF” appears.

To set CD power on

Repeat the procedure above and “CD POWER

ON” appears.

Notes

• When “CD POWER OFF” is selected, disc access

time is increased.

• You cannot change the setting in Power Saving

Mode.

To change the AM tuning interval

(except for European models)

The AM tuning interval is factory-preset to

9 kHz (or 10 kHz for some areas). To change the

AM tuning interval, tune in any AM station first,

then turn off the system. While holding M,

press ?/1 on the unit. When you change the

interval, all the AM preset stations are erased.

To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in Power

Saving Mode.

Tips

• The preset stations are retained for about a day even

if you disconnect the power cord or if a power failure

occurs.

• To improve broadcast reception, adjust the supplied

antennas, or connect a commercially available

external antenna.

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first

(see “Presetting radio stations” on page 14).

1 Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

tuner.

2 Press TUNER BAND repeatedly to

select “FM” or “AM”.

3 Press TUNING MODE repeatedly until

“PRESET” appears in the display.

4 Press – or + (or TUNING – or + on the

unit) repeatedly to select the desired

preset station.

Listening to non-preset radio

station

— Manual Tuning

1 Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

tuner.

2 Press TUNER BAND repeatedly to

select “FM” or “AM”.

3 Press TUNING MODE repeatedly until

“AUTO” and “PRESET” disappear from

the display.

4 Press – or + (or TUNING – or + on the

unit) repeatedly to tune in the desired

station.

Note

When tuner function is selected as the current function

and CD is pressed to select CD during “CD POWER

OFF”, it may take some time to switch the function

(page 15).

To Do this

Tune in a station

with a weak signal

Follow the procedure described

in “Manual tuning preset”

(page 14).

Set another station

to the existing

preset number

Start over from step 2. After

step 5, press – or + (or

TUNING – or + on the unit)

repeatedly to select the preset

number you want to store the

station.

Listening to the radio

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa AWPZX7 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Aiwa AWPZX7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info