Bedienungsanleitung Aiwa CDC-X317 (Seite 6 von 10) (Englisch, Französisch, Spanisch)

496624

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

CDCX517MX417/X317(YU)-total-En-6

ENGLISH

Note

• When you play a CD that is already inserted, CD play

starts at the point where it stopped the previous time.

A newly inserted CD starts from the first track.

• A CD-R or CD-RW may take some time to start playing

back, but this is not a malfunction.

• If a CD-R or CD-RW with no data or incompatible data

is inserted, “E03” will appear in the display. The unit

cannot play such discs.

Intro Play

You can locate a desired track by monitoring the first 10

seconds of all the tracks on a CD.

1 Press INT during CD play.

“SCAN” appears in the display.

2 Press INT again when the desired track is played.

The unit returns to normal CD play.

One track Repeat Play

You can play a track repeatedly.

1 Press REP1 during CD play.

“REPEAT1” appears in the display.

To cancel One track Repeat Play, press REP1 again.

Random Play

You can play all the tracks in random order.

1 Press RNDM during CD play.

“RANDOM” appears in the display.

To cancel Random Play, press RNDM again.

Note

During Random Play, pressing r allows you to skip

only to the beginning of the current track, not to the

previous track.

Labeled-side up

CD indicator Track number

Elapsed playing time

Eject a CD

Skip to the next track

Go back to the beginning

of the current track

Each extra press skips

backward one extra track

Locate a specific point in

a track

Press

Press and hold r or

t until you find the

point.

10 Press and hold INFO until the unit turns off, and

setting is completed.

When the unit is on, “MY INFO” appears in the

display indicating that the unit is standby for a timer.

During the timer-activated tuning, “MY INFO”

continues to flash.

To cancel the timer standby, press INFO so that

“MY INFO” disappears.

Note

• To discontinue the timer setting, press and hold PWR/

MUTE until the unit turns off.

• To check the setting, turn off the unit, then press INFO.

The unit displays the scheduled turn-on and turn-off

times with the appropriate radio frequency.

• The unit automatically starts tuning at the scheduled

time regardless of the current source mode. When the

scheduled program is over, the unit automatically

returns to the former source mode.

• Timer setting remains enabled even if you turn off the

unit, and then turn it on. This is true even if you detach

the front panel, and reattach it.

• However, if you press FNC to change the source mode

during timer-activated tuning, the scheduled program

is canceled.

CD PLAYER OPERATION

Playing a CD

You can play CDs, CD-Rs and CD-RWs using the

procedure described below.

1 Insert a CD.

“CD” appears in the display.

CD play starts.

If a CD is already inserted, press FNC repeatedly to

select CD play mode.

In normal play, when the last track finishes, the unit

returns to the first track and continues to play.

001/CDC-X517M/X417/X317(YU)E 00.12.25, 2:45 PM6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa CDC-X317 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info