Bedienungsanleitung Aiwa CDC-X427 (Seite 2 von 9) (Englisch, Französisch, Spanisch)

496626

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

ENGLISH

PRECAUTIONS

• Use only in a 12-volt DC negative-ground electrical

system.

• Disconnect the vehicle’s negative battery terminal

while mounting and connecting the unit.

• When replacing the fuse, be sure to use one with an

identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the

unit.

• Do NOT attempt to disassemble the unit. Laser beams

from the optical pickup are dangerous to the eyes.

• Make sure that pins or other foreign objects do not get

inside the unit; they may cause malfunctions, or create

safety hazards such as electrical shock or laser beam

exposure.

• When your vehicle has been parked in direct sunlight

resulting in a considerable rise in the temperature

inside, allow the unit to cool off before operating it.

• Keep the volume at a level at which you can hear

outside warning sounds (horns, sirens, etc.).

NOTE

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment

and receiver.

— Connect the equipment into an outlet on circuit

different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Modifications or adjustments to this product, which are

not expressly approved by the manufacturer, may void

the user’s right or authority to operate this product.

In addition to ordinary CDs, CD-Rs or CD-RWs can

be read by this unit. However, NEVER use a CD-R or

CD-RW that contains no data or data in the wrong

format, such as MP3 or other computer files.

ENGLISH

TABLE OF CONTENTS

THEFT PROTECTION .............................................. 2

BASIC OPERATION, AUDIO AND CLOCK

ADJUSTMENT ..................................................... 2

RADIO OPERATION ................................................. 3

CD PLAYER OPERATION ........................................ 4

AUXILIARY EQUIPMENT ......................................... 5

OTHER FUNCTIONS ............................................... 6

CARD REMOTE CONTROL ..................................... 6

TROUBLESHOOTING .............................................. 7

MAINTENANCE ........................................................ 7

SPECIFICATIONS .................................................... 7

Note

Some buttons are assigned two or more functions.

For detailed descriptions, refer to the related pages.

CD Notes

• Playing a defective or dusty CD can

cause dropouts in sound.

• Hold CDs as illustrated.

• Do NOT touch the unlabeled side.

• Do NOT attach any seal, label or

data protection sheet to either side of CD.

• Do NOT expose a CD to direct sunlight or excessive

heat.

• Wipe a dirty CD from the center outward with a cleaning

cloth.

Never use solvents such as benzine or alcohol.

• This unit cannot play 3-inch (8 cm) CDs.

• NEVER insert a 3-inch CD contained in the adapter or

any irregularly shaped CD.

The unit may not be able to eject it, resulting in a

malfunction.

DEMO (Demonstration) mode

The unit has an extra display (DEMO) mode which

demonstrates the illumination modes of the unit. The

unit switches to DEMO mode automatically if you turn

the unit on and leave it as it is for 5 seconds after all the

connections have been completed.

To cancel DEMO mode

1 During DEMO mode, press and hold SRC until “ILL”

appears in the display.

2 Press i or k to select “DE.”

3 Turn AUDIO CONTROL to select “DE 0.”

To resume DEMO mode, select “DE 1” in step 3.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa CDC-X427 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info