Bedienungsanleitung Aiwa CX-NA31 (Seite 17 von 76) (Englisch, Französisch, Spanisch)

496498

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

PROGRAMMED EDIT RECORDING

Programmed edit function enables CD recording while checking

the remaining time on each side of the tape as the tracks are

programmed.

The programmed edit recording will not start from a point halfway

in the tape, The tape must be recorded from the beginning of

either side.

Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out

frclm the unit,

Press the CD button and load the disc(s).

Press the EDIT/CHECK button twice while

pressing the SHIFT button on the remote control.

“ED1l-” and “PRGM” light up on the display.

Plress the numbered buttons on the remote

control to designate the tape length.

1Clto 99 minutes can be specified.

Maximum recording

Tape length

time for side A

I I

Tape side A (front side)

Press the one of the DISC DIRECT PLAY buttons

tc~select a disc.

Tlhen, press the numbered buttons and the + 10

button on the remote control to program a track.

Example: To select the 10th track of disc 2, press the DISC

DIRECT PLAY 2 button, then press the + 10 and O buttons.

Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time

cannot be programmed.

Remaining time

of side A

Total number

Programmed

of programmed

tracks

Press the EDIT/CHECK button while pressing the

SHIFT button on the remote control to select side

B and program the tracks for side B.

After confirming B on the display, repeat step 5,

Tape side B (reverse side)

Press the EDIT/CHECK button while pressing the

SHIFT button to select side A and press the O

REC/REC MUTE button to start recording.

CD play and recording of edited tracks for the first side start

simultaneously. When the last track programmed for side A

is finished, deck 2 enters the recording stop mode. After

entering the recording stop mode, go to step 9.

Press the EDIT/CHECK while pressing the SHIFT

button on the remote control for recording of

the second side.

“B” is displayed.

10 Turn over the tape in deck 2 and press the .

REC/REC MUTE button to start recording.

Recording starts.

To stop recording

Press the

■ button, Recordingand CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press the EDIT/CHECK button while pressing

the SHIFT button on the remote control to select side A or B, and

press the 44 or ›~ button repeatedly.

Program number

Track number

Programmed

track numbers

To change the program of each side

Press the EDIT/CHECK button while pressing the SHIFT button

on the remote control to select side A or B, and press the

❑

CLEAR button to clear the program of the selected side. Then

program tracks again.

To clear the edit program

Press the

■ button twice so

display.

that “EDIT disappears on the

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa CX-NA31 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info