Bedienungsanleitung Aiwa CX-NA92 (Seite 18 von 80) (Englisch, Französisch, Spanisch)

496520

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Al EDIT RECORDING

The Al edit function enables CD recording without worrying about

tape length and ttack length. When a CD is inserted, the unit

automatically calculates the total track length. If necessary, the

order of tracks is rearranged so that no track is cut short.

(Al: Artificial Intelligence)

Al edit recording will not start from a point halfway into the tape.

The tape must be recorded from the beginning of either side.

1 Insert the tape into deck 2, and press the DOLBY

NR button to turn Dolby NR on or off.

Insert the tape with the side to be recorded on first facing out

from the unit.

2 Press the CD button and load the disc(s).

3 Press the CD EDIT/CHECK button once.

“EDIT” and “Al” lights upon the display.

Each time it is pressed, the display changes as follows.

Al EDIT — PRGM EDIT

Press one of the DISC DIRECT PLAY buttons to

select a disc.

5 Press the - or FF button to designate the tape

length,

10 to 99 minutes can be specified.

In a few seconds, the microcomputer determines the tracks

to be recorded on each side of the tape.

● The numbered buttons on the remote control are also

available to designate the tape length.

Example: When using a 60-minute tape, press the 6 and O

buttons.

Tape side A Selected

Tape length

(front side)

tracks for side A

6 Press the ● REC/REC MUTE button to sta”rt

recording.

The tape is rewound to the beginning of the frcmt side, the

lead segment is played through for 10 seconds, and recording

starts. When recording on the front (side A) ends, recording

on the back (side B) starts.

To stop recording

Press the

■ button. Recording and CD play stop simultaneously.

To clear the edit

program

Press the ■ CLEAR button twice so that “EDIT” disappears on

the display.

To check the order of the programmed track numbers

Before recording, press the CD EDIT/CHECK to select side A or

B, and press the U or > button repeatedly.

Programmed

Track number

track numbers

Program number

To add tracks from other discs to the edit program

If there is any time remaining on the tape after step 5, you can

add tracks from other discs in the CD compartment

1 Press the CD EDIT/CHECK button to select side A or B.

2 Press one of the DISC DIRECT PLAY buttons to select a disc.

3 Press the numbered buttons on the remote control to select

tracks. PRGM appears on the display.

A track whose playing time is longer than the remaining time

cannot be programmed.

4 Repeat steps 2 and 3 to add more tracks.

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than

the specified recording time printed on the label. This unit can

program tracks to use the extra time. When the total recording

time is a little longer than the tape’s specified recording time

after editing, the display shows the extra time (without a minus

mark), instead of the time remaining on the tape (with the minus

mark).

● Recording is inhibited if the erasure prevention tab on either

side of the tape is broken off.

● The Al edit function cannot be used with discs containing 31

tracks or more.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa CX-NA92 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info