Bedienungsanleitung Aiwa hv dh 1 mp (Seite 24 von 37) (Deutsch, Englisch, Holländisch, Italienisch, Spanisch)

138377

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Operation with DVD and Video CD

Playing a DVD and Video CD

Playback Setup

 Turn on the TV and select the video input source con-

nected to the DVD player.

 Audio system: Turn on the audio system

and select the input source connected to the

DVD player.

Press OPEN/CLOSE to open the disc tray.

Load your chosen disc in the tray, with the label

facing up.

When a double-sided DVD is inserted, make sure

the side you want to play is facing up.

Press OPEN/CLOSE to close the tray.

READING appears on the TV screen, and playback

starts automatically. If playback does not start,

press PLAY.

In some cases, the disc menu might appear

instead.

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD or Video CD which contains a menu.

Use the buttons to select the title/chapter

you want to view, then press OK/ENTER to start play-

back.

Press TOP/MENU or DISC MENU to return to the menu

screen.



Use the number buttons to select the track you want

to view.

Press RETURN to return to the menu screen.



Menu setting and the exact operating procedures for

using the menu may differ depending on the disc.

Follow the instructions on the each menu screen.

You also may set PBC to Off under setup. See page

18.

Notes

– If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit code must

be entered and/or the disc must be authorized (see

“Parental Control”, on page 19).

– DVDs may have a region code.

– Your player will not play discs that have a region code

different from your player. The region code for this

player is 2 (two).

– To watch a DVD while performing a timer

recording, press TV/VCR.

General Features

Note

Unless stated otherwise, all operations

described use the remote control. Some

features may also be available on the Setup menu.

Moving to another TITLE

When a disc has more than one title, you can move to

another title as follows:



Press DISPLAY when playback is stopped, then

press j/l or the appropriate numbered button (0-9)

to select a title number.

Moving to another CHAPTER/TRACK

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

 Press . or > briefly during

playback to select the next chapter/track or to return

to the beginning of the current chapter/track.



Press . twice briefly to step back to the previous

chapter/track.



To go directly to any chapter during DVD playback,

press DISPLAY. Then, press / to select C

(chapter) (or for a Video CD, select T for track). Then,

enter the chapter/track number using the numbered

buttons (0-9).

Note

For two-digit numbers, press the buttons in rapid

succession.

Slow Motion

1 Press . or > during pause.

The player will enter SLOW mode.

2 Use the . or > to select the required speed: t

1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16,

T 1/8, T 1/4 or T 1/2 (forward).

3 To exit slow motion mode, press PLAY.

Note

Slow motion playback in reverse is not applicable for

Video CD.

VCD1.1VCD2.0

DVD

1/31/12

VCD1.1

DVD

1/3

DVD

VCD2.0

DVD

VCD1.1VCD2.0

DVD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa hv dh 1 mp Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info