Bedienungsanleitung Aiwa LED506UHD (Seite 5 von 56) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

793992

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en 8

FRONT VIEW

DESCRIPTION OF THE TELEVISION

WALL-HANGING BRACKET

An optional wall mount can be used with

your television.

Consult with your local dealer to purchase

the recommended wall mount bracket.

Carefully attach the wall mount bracket

to the rear of the TV.

Install the wall mount bracket on a solid

wall perpendicular to the ﬂoor.

Please contact qualified personnel to

install the wall mount in any other place

other than a perpendicular wall.

Detailed instructions will be included

with the wall mount.

Please use a wall mount bracket that

adequately secures the apparatus to the

wall leaving enough space to connect

other external devices.

- Disconnect the power before moving

or installing the TV. Otherwise, electric

shock may occur.

- Remove the stand before installing the TV

on a wall mount.

- The TV may fall causing severe injury

if you install it on the ceiling or a

slanted wall. Use an authorized wall

mount and contact your local dealer

or qualified personnel or it won’t be

covered by the warranty.

- Do not over tighten the screws as this

may cause damage to the TV and void

your warranty.

- To prevent injury, this apparatus must be

securely attached to the floor/wall

according to the installation instructions.

- Use screws and wall mounts following

these instructions.

Any damages or injuries caused due

to misuse or use of unauthorized

accessories will not be covered by

the warranty.

Notes:

1. For TV sets with terminals towards the

wall, in order to leave enough space to

use the terminals, a rubber cushion is

needed with each screw to fix the wall

mount.

lt’s a small hollow pillar with an 8mm

internal diameter, 18mm external diameter

and _>30mm height.

2. The information in this document is

subject to change without notice. The

manufacturer accepts no liability for

damage resulting directly or indirectly

from faults, incompleteness or discrepancies

between the user manual and the product

described.

3. In a dry environment due to static

electricity, the product may restart and

return to the main OSD interface, USB

player interface or the previous source

mode. lt’s normal, please continue to

operate the TV as you normally would.

DISASSEMBLY AND INSTALLATION

MULTIFUNCTION & POWER BUTTON

During standby, press to turn on the TV.

When TV is on, short press to access

the source list, and short press again to

access to the selected source.

When the TV is on, long press to turn

it off.

VOL+ / VOL- (VOLUME +/-)

Press left to increase volume or right to

decrease the volume level.

LED DISPLAY SCREEN

IR REMOTE CONTROL SENSOR &

POWER INDICATOR

In standby mode the indicator light

is red; when switching on the TV the

indicator light turns blue.

STAND HOLDERS

CH+ / CH- (CHANNEL +/-)

Press forward to select the next channel or

backward to select the previous channel.

BOTTOM VIEW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa LED506UHD Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info