Bedienungsanleitung Aiwa NSX-A10 (Seite 5 von 44) (Englisch, Französisch, Spanisch)

496477

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

To stand the AM antenna on a surface

Fix the claw to the slot.

BEFORE OPERATION

b PRESET

:,, ,,, ,,-;

...,.

SHIFT

FUNCTION

To turn the unit on

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,

CD). The unit is turned on.

At this time, playback of the inserted disc begins, or the previously

tuned station is received (Direct Play Function).

The POWER button is also available to turn the unit on.

The disc compartment may open and close to reset the unit,

when the unit is turned on.

After use

Press the POWER button to turn off the power. The display

changes to the clock.

DEMO (Demonstration) mode

When the AC cord is connected for the first time, the display

window demonstrates the functions of the unit. When the power

is turned on, the DEMO display is overridden by the operation

display.

To cancel DEMO mode

Press the 11 SET button while the power is off. In this time, the

clock on the display appears. (To set the current time, see

“SETTING THE CLOCK on page 11.)

To restore the DEMO mode, press the E PRESET button while

the power is off.

Using the headphones

Flash window

The window on the top of the unit lights up or flashes while the

unit is being powered on,

To turn off the light, press the CD button while pressing the

■ CLEAR button. To turn back on, repeat the above.

To use the SHIFT button on the remote control

Buttons @ have two different functions. One of these functions

is indicated on the button, and the other on the plate above the

button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button

while pressing the SHIFT button.

To use the FUNCTION button on the remote control

The FUNCTION button substitutes for the function buttons (TAPE, ‘--

TUNER, ViDEO/AUX,CD) on the main unit.

Each time the FUNCTION button is pressed, the next function is

selected cyclically.

Inserting batteries into the remote control

Detach the battery cover on the rear of the remote control and

insert two R6 (size AA) batteries.

R6(AA)

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the main unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with new ones.

● If the unit is not going to be used for an extended period of

time, remove the batteries from the remote control to prevent

possible electrolyte leakage.

● The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor inside the display window is exposed to intense light,

such as direct sunlight

- Other remote controls are used nearby (television, etc.)

Connect headphones to the PHONES jacks with a stereo

standard plug (@6.3mm,

‘/4 inch).

No sound is output from the speakers while the headphones are

plugged in,

ENGLISH 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-A10 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info