Bedienungsanleitung Aiwa NSX-A111 (Seite 13 von 56) (Englisch, Französisch, Spanisch)

496484

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

(—’3,7,

8;9’

5-+ .7Tj 5

4,5

3,7,

8,9

In the programmed edit recording function the tracks can be

programmed while checking the remaining time on each side of

the tape.

Insert the tape into deck 1.

Insert the tape with the side to be recorded on first facing out

from the unit. Wind up the tape with +4,

Press CD and load the disc(s).

Press CD EDIT/CHECK twice while pressing

SHIIFT on the remote control.

“EDIT” and “PRGM” are displayed,

@When “Al” is displayed, press CD EDIT/CHECK while

pressing SHIFT again.

Press numbered buttons on the remote control

to designate the tape length.

10 to 99 minutes can be specified,

9 The + and ~ are also available to designate the tape

length,

Tape side A (front side)

Tape length

Maximum recording

time for side A

Press DISC DIRECT PLAY 1-3 to select a disc.

Then, press numbered buttons O-9 and + 10 on

the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC

DIFiECT PLAY 2, then press +10 and O.

Selected track number

Remaining time on side A

Program number

Programmed tracks

Repeat step 5 for the rest of the tracks for side ‘

:..ay,~:

A track whose playing time is longer than the remaining time “,) ~

cannot be programmed,

!11!

,,,

‘...

y,, ,,:.

Press CD EDIT/CHECK while pressing SHIFT on “~

the remote control to select side B and program “’~

the tracks for side B.

After confirming “Bon the display, repeat step 5.

Tape side B (reverse side)

Press CD EDiT/CHECK while pressing SHIFT on

the remote control to select side A and press

●

to start recording.

CD play and recording of edited tracks for the first side start

simultaneously, When the end of tape is reached, deck 1 enters

the recording stop mode. After entering the recording stop

mode, go to step 9.

Press CD EDIT/CHECK while pressing SHIFT on

the remote control for recording of the second

side.

“B” is displayed.

10 Turn over the tape in deck 1 and press ● to start

recording.

Recording starts.

To stop recording

Press ■/A on deck 1, Recording and CD play stop

simultaneously.

❑

To check the order of the programmed track numbers

Before recording, press CD EDIT/CHECK while pressing SHIFT

on the remote control to select side A or B, and press - or

- repeatedly.

Tape side

Program number

Track number Programmed

track numbers

change the program of each side

Press CD EDIT/CHECK while pressing SHIFT on the remote

control to select side A or B, and press

■ CLEAR to clear the

program on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice so that “EDIT disappears on the display.

● Up to 30 tracks can be programmed from any of the inserted

discs.

● “FUL12 is displayed if you attempt to program more than 30

tracks.

ENGLISH I

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-A111 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info