Bedienungsanleitung Aiwa NSX-A223 (Seite 12 von 64) (Englisch, Französisch, Spanisch)

496490

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

This section explains how to record from the tuner, CD player, or

external equipment.

Preparation

● Use Type I (normal) tapes only.

● Set the tape to the point where recording will start.

● Note that recording is done on only one side of the tape.

Insert the tape to be recorded on into deck 2.

Insert the tape with the side to be recorded on first facing out

from the unit.

APUSH

EJECT

Press function (CD, TUNER or ViDEO/AUX) and

prepare the source to be recorded.

To record from a CD, press CD and load the disc(s).

To record from a radio broadcast, press TUNER and tune

in to a station.

To record from a connected source, press VIDEO/AUX.

Press ● REC/REC MUTE to start recording.

When recording from a connected source, start play~ack of

the source.

When the selected function is CD, playback and recording

start simultaneously.

To stop recording, press

■ .

To pause recording, press 11. (Applicable when the source is

TUNER or VIDEO/AUX) To resume recording, press it again.

Sound adjustment during recording

The output volume and tone of the speakers or headphones are

freely varied without affecting the recording.

*%?W,* . . . . “.s, ,.,,.,,..$,,.P*,. . . . . ....=. .,,. . . b 9..

,“..< ..- . . . . .

.,, >,. . . . . . . . . . . . .- - .--”,.,,-* .,,AW,;* >,.,*

.3*.>SI.. . ... .. . . ..s . . . ,$,.,,,. !87, ,?s: -,,,’ ::?3.-’:

. . .. . .. ... . . ?

INSERTING BLANK SPACES

Insertion of 4-second blank spaces enables you to activate the

Music Sensor function. (Applicable when the source is TUNER

or VIDEO/AUX.)

1 Press @ REC/REC MUTE during recording or while in

recording pause mode.

~ on the display flashes for 4 seconds and 4-second blank

space is made. Then, the deck enters the recording pause

mode.

2 Press Ii to resume recording.

To insert a blank space of less than 4 seconds, press @

REC/REC MUTE again while ~ is flashing.

insertblankSOacesof more than 4 seconds, after the deck

enters recording pause mode, press e REC/REC MUTE again.

Each time the button is pressed, a 4-second blank space is

added.

About cassette tapes

● To prevent accidental erasure, break off the plastic tabs

on the cassette tape after recording with a screwdriver or

other pointed tool.

Side A

Tab for side A

To record on the tape again, cover the tab openings with

adhesive tape, etc.

● 120-minute or longer tapes are extremely thin and easily

deformed or damaged. They are not recommended.

● Take up any slack in the tape with a pencil or similar tool

before use. Slack tape may break orjam in the mechanism.

“CAN’T REC is displayed if you attempt to record on a tape with

the plastic tabs broken off.

To erase a recording

1 Insert the tape to be erased into deck 2 and press TAPE DECK

1/2 to display ‘rTP 2.

2 Set the tape to the point where the erasure is to be started.

3 Press

● REC/REC MUTE to start the erasure.

12 ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-A223 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info