Bedienungsanleitung Aiwa NSX-A303 (Seite 15 von 64) (Englisch, Französisch, Spanisch)

496495

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

In the programmed edit recording function the tracks can be

programmed while checking the remaining time on each side of

the tape as the tracks are programmed.

The programmed edit recording will not start from a point halfway

in the tape. The tape must be recorded on from the beginning of

either side.

Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out

from the unit.

Press CD and

load the disc(s).

Press EDIT/CHECK twice while pressing SHIFT

on the remote control.

“EDIT” and “PRGM” are displayed.

c When “Al” is displayed, press

EDIT/CHECK while pressing

SHIFT again.

Press numbered buttons on the remote control

to designate the tape length.

10 to 99 minutes can be specified.

● The -, > or MULTI JOG are also available to designate

the tape length.

Tape length

Tape side A (front side)

Maximum recording

time for side A

Press DISC DIRECT PLAY 1-3 to select a disc.

Then, press numbered buttons O-9 and + 10 on

the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC

DIRECT PLAY 2,

then press +10 and O.

Remaining time

Programmed

on side A

tracks

Repeat step 5 for the rest of the tracks for side! ~

ill

,3 ~

,~::miij

A track whose playing time is longer than the remaining time ~~; ~

cannot be programmed.

,>,,:

~,. ,

., ‘:;/

::S”:

Press EDIT/CHECK while pressing SHIFT on the! ,#

remote control to select side B and program the

tracks for side B.

After confirming B on the display, repeat step 5.

Tape side B, (reverse side)

Press EDIT/CHECK while pressing SHIFT

select side A and press

● REC/REC MUTE

start recording.

CD play and recording of edited tracks for the first side start

simultaneously. When the last track programmed for side A

is finished, deck 2 enters the recording stop mode. After

entering the recording stop mode, go to step 9.

Press EDIT/CHECK while pressing SHIFT on tht?

remote control for recording of the second side.

B is displayed.

10 Turn over the tape in deck 2 and press ● REC/

REC MUTE to start recording.

Recording starts.

To stop recording

Press ■ , Recording and CD play stop simultaneously.

check the order of the programmed track numbers

❑

Before recording, press EDIT/CHECK while pressing SHIFT on

the remote control to select side A or B, and press - or N>

repeatedly.

Disc number

Tape side Program number

Track number

Programmed track

numbers

To change the program of each side

Press EDIT/CHECK while pressing SHIFT on the remote control

to select side A or B, and press 9 CLEAR to clear the program

on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice so that “EDIT” disappears on the dlispla.y.

ENGLISH14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-A303 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info