..... .....,,, ,”,
... ... .
MUSIC SENSOR
If there is a 4-second or longer blank between each track, a search
for the beginning of the current or next track during playback can
be done easily.
Press 44 or ➤> during playback referring to the playback side
indicator (+ or -) on the display.
For example, when *is pressed while - is displayed, playback
of the next track starts.
Music sensor function may not be able to detect tracks under
the following conditions:
● Blanks of less than 4 seconds between tracks
@Noisy blanks
● Long passages of low-end sound
● Low overall recording levels
4
1
After playback on one deck finishes, the tape in the other deck
will start to play without interruption.
1
2
3
4
Insert tapes into deck 1 and deck 2.
Press TAPE/DECK 1/2 to select the deck to be
played back first.
Press REV MODE to select =1.
Press ~ P to start playback.
Playback continues until 9 is pressed.
About cassette tapes
* To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
@
‘E
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to cover
the Type 11tape detection slot.)
● 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use. Siack tape may break orjam in the mechanism.
ENGL/SH 17
