Bedienungsanleitung Aiwa NSX-AJ22 (Seite 16 von 62) (Englisch, Französisch, Spanisch)

496532

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

ENGLISH

PROGRAMMED EDIT RECORDING

In the programmed edit recording function the tracks can be

programmed while checking the remaining time on each side of

the tape.

The programmed edit recording will not start from a point halfway

in the tape. The tape must be recorded on from the beginning of

either side.

Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out

from the unit.

Press CD and load the disc(s).

Press CD EDIT/CHECK twice while pressing

SHIFT on the remote control.

“EDIT” and “PRGM” are displayed.

• When “AI” is displayed, press CD EDIT/CHECK while

pressing SHIFT again.

Press numbered buttons 0-9 on the remote

control to designate the tape length.

10 to 99 minutes can be specified.

• f, g or MULTI JOG are also available to designate

the tape length.

Press DISC DIRECT PLAY 1-3 to select a disc.

Then, press numbered buttons 0-9 and + 10 on

the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC

DIRECT PLAY 2, then press +10 and 0.

Repeat step 5 for the rest of the tracks for side

A track whose playing time is longer than the remaining time

cannot be programmed.

Press CD EDIT/CHECK while pressing SHIFT on

the remote control to select side B and program

the tracks for side B.

After confirming “B” on the display, repeat step 5.

Press CD EDIT/CHECK while pressing SHIFT on

the remote control to select side A and press w

REC/REC MUTE to start recording.

The tape is rewound to the beginning of the front side, the

lead segment is played through for 10 seconds, and recording

starts. When the last track programmed for side A is finished,

deck 2 enters the recording stop mode. After entering the

recording stop mode, go to step 9.

Press CD EDIT/CHECK while pressing SHIFT on

the remote control for recording of the second

side.

“B” is displayed.

Turn over the tape in deck 2 and press w REC/

REC MUTE to start recording.

Recording starts.

To stop recording

Press s. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press CD EDIT/CHECK while pressing SHIFT

on the remote control to select side A or B, and press f or

g repeatedly.

To change the program of each side

Press CD EDIT/CHECK while pressing SHIFT on the remote

control to select side A or B, and press s CLEAR to clear the

program on the selected side. Then program tracks again.

To clear the edit program

Press s CLEAR twice so that “EDIT” disappears on the display.

• Up to 30 tracks can be programmed from any of the inserted

discs.

•“FULL” is displayed if you attempt to program more than 30

tracks.

Tape side B (reverse side)

Tape length Maximum recording

time for side A

Tape side A (front side)

Remaining time on side A

Selected track number Programmed tracks

Program number

Programmed

tracks number

Tape side

Track number

Program number

Disc number

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-AJ22 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info