Bedienungsanleitung Aiwa NSX-AJ54 (Seite 13 von 68) (Englisch, Französisch, Spanisch)

496539

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

RANDOM/REPEAT PLAY

Use the remote control.

RANDOM play

All the tracks on the selected disc or all the discs can be played

randomly.

REPEAT play

A single disc or all the discs can be played repeatedly.

Press RANDOM/REPEAT while pressing SHIFT.

Each time it is pressed, the function can be selected cyclically.

RANDOM play — RANDOM lights up on the display.

REPEAT play —

lights up on the display.

RANDOM/REPEAT play — RANDOM and

light up on the

display.

Cancel — RANDOM and

disappear from the display.

To play all discs, press c to start play.

To play a single disc, press one of DISC DIRECT PLAY 1-3 to

start play.

During random play it is not possible to skip to the previously

played track with f.

BLANK SKIP PLAY

The silent portions between tracks recorded on a CD can be

skipped during playback.

Press CD BLANK SKIP.

“CD BLANK SKIP ON” is displayed and a small dot will appear

in the display.

Press c to start playback.

The silent portions between tracks will be skipped, and the

sound will be played back without interruption. If a track fades

out (ends with the sound gradually decreasing), the fadeout

portion also will be skipped.

To return to normal playback

Press CD BLANK SKIP again, and the dot in the display will

disappear.

• There may be a case where BLANK SKIP PLAY does not

function correctly.

• BLANK SKIP PLAY is automatically canceled when performing

AI EDIT RECORDING (page 16), PROGRAMMED EDIT

RECORDING (page 17), or recording during PROGRAMMED

PLAY (page 13) or RANDOM PLAY (page 13).

CD PLAYING

PROGRAMMED PLAY

Up to 30 tracks can be programmed from any of the inserted

discs.

Use the remote control.

Press PRGM while pressing SHIFT in stop mode.

“PRG” is displayed .

Press DISC DIRECT PLAY 1-3 to select a disc.

Go to the next step when the tray stops rotating.

Press numbered buttons 0-9 and +10 to program

a track.

Example:

To select the 25th track, press +10, +10 and 5.

To select the 10th track, press +10 and 0.

Repeat steps 2 and 3 to program other tracks.

Press c to start play.

To check the program

Each time f or g is pressed in stop mode, a disc number,

track number, and program number will be displayed.

To clear the program

Press s CLEAR in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed

after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

To play the programmed tracks repeatedly

After programming the tracks, press RANDOM/REPEAT

repeatedly while pressing SHIFT until

appears on the display.

• During programmed play, you cannot perform random play,

check the remaining time, and select a disc or track. “Can’t

USE” is displayed if you attempt to select a track.

•“FULL” is displayed if you attempt to program more than 30

tracks.

Small dot

Selected track number

Total number of

selected tracks

Program number Total playing time of

the selected tracks

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-AJ54 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info