Bedienungsanleitung Aiwa NSX-AJ700 (Seite 18 von 22) (Englisch, Französisch, Spanisch)

496542

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

TIMER OPERATIONS

* Open the control panel with PANEL OPEN/CLOSE if needed.

Sleep timer

Turns off the unit automatically after a specified time.

Press SHIFT+SLEEP on the remote control.

"SLEEP" appears on the display.

Press f or g repeatedly to set the sleep

timer duration.

With each press, the timer duration changes in 5-minute

steps between 5 to 240 minutes. If there is no button input

for 4 seconds, the current setting is entered automatically.

The unit turns off after the selected time.

•MULTI JOG is also available in place of f or g.

To check the remaining time until the unit turns off

Press SHIFT+SLEEP on the remote control. The remaining

time is displayed for 4 seconds.

To cancel the sleep timer

Press SHIFT+SLEEP twice on the remote control so that

"SLEEP oFF" is displayed.

Timer playback

Turns on the unit at a specified time for the specified duration.

Make sure the clock is set correctly.

Press one of the function buttons to select the

desired playback source.

Press TIMER (SHIFT+TIMER on the remote

control).

"5" indicator lights up and " PLAY" appears on the

display. Then, the timer-on time and the source name

appear alternately on the display.

Press f or g to set the timer-on time, then

press aSET or ENTER.

If f or g is not pressed within 6 seconds, you

will exit the timer setting mode and the previous setting,

however, is entered.

•MULTI JOG is also available in place of f or g.

Press f or g to set the timer-activated

duration, then press aSET or ENTER.

With each press, the timer-activated duration changes in

5-minute steps between 5 to 240 minutes.

If there is no button input for 4 seconds, the current setting

is entered automatically.

•MULTI JOG is also available in place of f or g.

Adjust the volume and tone for timed playback.

If the volume level is set to 17 or higher, it is automatically

turned down to 16 when the unit is turned on by the timer.

Prepare the source.

To play CD(s), load disc(s).

To play the radio, select the band and tune in to the desired

station.

To play a tape, insert the tape.

To play external equipment connected to the VIDEO/AUX

jacks, set an external timer for the equipment so that its

playback begins at the same time.

Press POWER 6STANDBY/ON to turn the unit

off.

"5" remains on the display to indicate the timer standby

mode.

At timer-on time, the unit turns on and plays the selected

source. After the specified timer-activated duration, the

unit turns off again.

•Timer playback will not begin unless the unit is turned off

first.

•Connected equipment cannot be turned on or off by the built-

in timer of this unit. Use an external timer.

•The timer source can be changed with the function buttons

before completing step 3.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-AJ700 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info