Bedienungsanleitung Aiwa NSX-AJ80 (Seite 12 von 83) (Englisch, Französisch, Spanisch)

496543

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

ENGLISH

PRESETTING STATIONS

The unit can store a total of 32 preset stations. When a station is

stored, a preset number is assigned to the station. Use the preset

number to tune in to a preset station directly.

Press TUNER/BAND to select a band, and press

f DOWN or g UP to select a station.

Press a SET to store the station.

A preset number beginning from 1 in consecutive order for

each band is assigned to the station.

Repeat steps 1 and 2.

The next station will not be stored if a total of 32 preset stations

for all the bands have already been stored.

“FULL” is displayed if you attempt to store more than 32 preset

stations.

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.

Press BAND while pressing SHIFT to select a

band.

Press numbered buttons 0-9 and +10 to select a

preset number.

Example:

To select preset number 20, press +10, +10 and 0.

To select preset number 15, press +10 and 5.

Selecting a preset number on the main unit

Press TUNER/BAND to select a band. Then, press

repeatedly or turn MULTI JOG.

Each time

is pressed, the next ascending number is

selected.

To clear a preset station

Select the preset number of the station to be cleared. Then, press

s CLEAR, and press a SET within 4 seconds.

The preset numbers of all other stations in the band with higher

numbers are also decreased by one.

Preset number

RADIO RECEPTION

MANUAL TUNING

Press TUNER/BAND repeatedly to select the

desired band.

FM AM

When TUNER/BAND is pressed while the power is off, the

power is turned on directly.

To select a band with the remote control

Press BAND while pressing SHIFT.

Press f DOWN or g UP to select a station.

Each time the button is pressed, the frequency changes.

When a station is received, “TUNE” is displayed for 2 seconds.

During FM stereo reception, 1 is displayed.

To search for a station quickly (Auto Search)

Keep f DOWN or g UP pressed until the frequency starts

to change rapidly. After tuning in to a station, the search stops.

To stop the Auto Search manually, press f DOWN or g UP.

• The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press MONO TUNER while pressing SHIFT on the remote control

so that “MONO” appears on the display.

Noise is reduced, although reception is monaural.

To restore stereo reception, repeat the above so that “MONO”

disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If

you use this unit in an area where the frequency allocation system

is 9 kHz/step, change the tuning interval.

Press POWER while pressing TUNER/BAND.

To reset the interval, repeat this procedure.

When the AM tuning interval is changed, all preset stations are

cleared. The preset stations have to be set again.

1 TUNE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-AJ80 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info