Bedienungsanleitung Aiwa NSX-MA845 (Seite 7 von 100) (Englisch, Französisch, Spanisch)

496565

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

~ ~..... -- .-.~..._._.=J=J ~

To turn the power on

Press one of the function buttons (TAPE/DECK 1/2, TUNER/

BAND, VIDEO/AUX/5.1 CH, CD, MD). Playback of the inserted

disc or tape begins, or the previously tuned station is received

(Direct Play Function).

POWER is also available,

When the power is turned on, the disc compartment may open

and close to reset the unit.

To turn the power off

Press POWER.

Flash Window

The inside of both cassette holders are lit up upon powering up.

The light turns off when you hold down TAPE and press ,.

Repeat the process to turn the light back on.

To change the brightness level of the display

1 Press ECO so that “ECO MODE” is displayed.

2 Within 4 seconds, turn MULTI JOG to display “DIM MODE”,

and then press ENTER within 4 seconds.

3 Within 4 seconds, turn MULTI JOG to select the dimmer mode

as below.

The mode will be automatically set after 4 seconds. It will also

be set if ENTER is pressed within 4 seconds after step 3.

~DIM-OFF

*DIMMER 1*Dl MMER2~Dl MMER3

DIM-OFF: The normal display.

DIMMER 1: The illumination of the display is dimmer than

usual,

DIMMER 2: The illumination of the display is dimmer than

DIMMER 1,

DIMMER 3: The illumination of the display is dimmer than

DIMMER 2, and the front panel blacks out.

If the timer recording (page 29) is done with the economizing

mode (page7) set to “ON” and the power turns off, the dimmer

mode will be set to “DIMMER 3“ the next time the power is

turned on.

SETTING POWER ECONOMIZING MODE

!Setting this unit to power economizing mode reduces power

consumption as follows.

IIWhen the power is turned off, all the display lights turn off.

However, if the clock is not set, the game Demo (page 8) will

begin when the power is turned off.

~,If CD, Tape or Rhythm play function (page 9) does not play for

10 minutes or if there is no audio input from any connected

external equipment for 10 minutes when VI DEO/AUX/5.l CH or

MD is selected as the source, the power shuts off.

uWhen the power turns on due to timer recording (page 29), the

display brightness level is set to “DIMMER 3“ (page 7), all button

lamps are off, and the volume is set to the minimum level (0).

IIThe display brightens only when operating the

Unit. When the

unit has not been used for 10 seconds, the brightness level

switches to the mode previously selected in “DIM MODE”. (Page

(If the display brightness level is set to “DIM-OFF”, the

brightness does not change. When the level is “DIMMER 3“,

the button lamps are also turned off.)

Press ECO.

“ECO MODE” will be displayed.

Press ENTER within 4 seconds.

The current power-economizing mode status will be displayed.

If the power-economizing mode is OFF: ECO OFF

If the power-economizing mode is ON: ECO ON

Turn MULTI JOG within 4 seconds to switch the

power-economizing mode on or off.

Example: When “ON” is selected

The mode will be automatically set after 4 seconds. It will also

be set if ENTER is pressed within 4 seconds after step 3.

Toviewthe clock when all the display Iightsturn off, press CLOCK

so that the time is displayed for 4 seconds.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-MA845 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info