Bedienungsanleitung Aiwa NSX-MT720 (Seite 29 von 92) (Englisch, Französisch, Spanisch)

496580

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

5.1 CH INPUT jacks of this unit support the DOLBY DIGITAL

SURROUND system.

Connect a DVD player with 5.1 CH output jacks to this unit using

cables with RCA phono plugs as follows;

DVD player’sjack “

This unit’s jack

5.1 CH OUTPUT FRONT (L, R), etc. 5.ICH FRONT (L,R)

5.1 CH OUTPUT REAR (L, R), etc. 5.1 CH REAR (L,R)

5.1 CH OUTPUT CENTER, etc. 5.1 CH CENTER

5.ICH OUTPUT SUB WOOFER, etc. 5.ICH SUB WOOFER

LINE OUT (L, R), etc. VIDEO/AUX

(See =.)

● If the DVD is not connected to VI DEO/AUX jack of this unit;

- the spectrum analyzer dose not show the sound level of the

DVD player.

- the sound from the connected DVD player cannot be recorded.

To remove these limitations, connect the LINE OUT jacks of the

DVD player to VIDEO/AUX jacks of this unit besides connecting

to 5.ICH INPUT jacks. The signals through VIDEO/AUX jacks

enable the spectrum analyzer to work and the recording to be

done.

Refer also to the operating Instructions of the DV13 player.

c DOLBY DIGITAL SURROUND sound cannot be recorded in

any way.

.,..,“..%,..:..”. .: ,,. ; ; : ...,...“.. : ... . .

LI’S’TENING”””’”’TO”DOLBY DIG ITA,L :

SURROUND SOUND

;Q’,

.:*”

z;’

:8:

MANUAL @

SELECT

“*

< DOWN, O

-UP

When a DVD player is connected to the 5.1 CH INPUT Jacks, of

this unit, you can listen to DOLBY DIGITAL SURROUND sound,

which enables you to enjoy theater-quality sound in your home.

Press VI DEO/AUX/5.l CH repeatedly until “5.1 ch

IN” is displayed.

2 Start playing DOLBY DIGITAL SURROUND :sound

on the DVD player.

● The DOLBY PRO LOGIC, BBE and the SURROUND are

automatically canceled when the 5.1 CH is selected.

● Make sure the software played back with the connected DVD

player support the DOLBY DIGITAL SURROUND.

● The function is changed from the 5.1 CH to the VI DEC) when;

- the headphones are plugged in.

- the MIC or ECHO level is changed.

- the Rhythm play function, the SURROUND system, the

DOLBY PRO LOGIC or the Karaoke function is turned on.

To adjust the sound levels of the center and surround

smeakers in DOLBY DIGITAL SURROUND

Press VIDEO/AUX/5.1 CH repeatedly until “5.1 ch IN” is

displayed.

Press MANUAL SELECT (TEST) repeatedly.

Speaker names appear in turn as follows;

UR (Speaker balance) x

CEN: Center speaker —

S-R: Right surround speaker - S-L: Left surround speaker.

Press 4 DOWN or

➤p UP to adjust the sound level while

“CEN”, “S-L” or “S-R” is displayed.

Each level can be adjusted between -8dB and +7dB

Repeat steps 2 and 3 to adjust each speaker’s sound level.

If the surround speakers or the center speaker level of the DOL13Y

DIGITAL SURROUND is changed, that of the SURROUND

system (page 11) and the DOLBY PRO LOGIC (page 21) is also

changed.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-MT720 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info