Bedienungsanleitung Aiwa NSX-MTD77 (Seite 11 von 27) (Englisch, Französisch, Spanisch)

496587

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

ENGLISH

MANUAL TUNING

MONO

TUNER

Press TUNER/BAND repeatedly to select the

desired band, FM or AM.

When TUNER/BAND is pressed while the power is off, the

power is turned on directly.

Press f DOWN or g UP to select a station.

Each time the button is pressed, the frequency changes.

When a station is received, “TUNE” is displayed for 2 seconds.

During FM stereo reception, 1 is displayed.

To search for a station quickly (Auto Search)

Keep f DOWN or g UP pressed until the frequency starts

to change rapidly. After tuning in to a station, the search stops.

To stop the Auto Search manually, press f DOWN or g

UP.

• The Auto Search may not stop at stations with very weak

signals.

When an FM stereo broadcast contains noise

Press MONO TUNER on the remote control so that “MONO”

appears on the display.

Noise is reduced, although reception is monaural.

To restore stereo reception, press the button again so that MONO

disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If

you use this unit in an area where the frequency allocation system

is 9 kHz/step, change the tuning interval.

Press POWER while pressing TUNER/BAND.

To reset the interval, repeat this procedure.

When the AM tuning interval is changed, all preset stations are

cleared. The preset stations have to be set again.

PRESETTING STATIONS

CLEAR

MULTI JOG

0-9, +10

The unit can store a total of 32 preset stations. When a station is

stored, a preset number is assigned to the station. Use the preset

number to tune in to a preset station directly.

Press the TUNER/BAND to select a band, and

press f DOWN or g UP to select a station.

Press a SET to store the station.

A station is assigned a preset number, beginning from 1 in

consecutive order for each band.

Repeat steps 1 and 2.

The next station will not be stored if a total of 32 preset stations

for all the bands have already been stored.

“FULL” is displayed if you attempt to store more than 32 preset

stations.

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.

Press TUNER/BAND to select a band.

Press numbered buttons 0-9 and +10 to select a

preset number.

Example:

To select preset number 15, press +10 and 5 .

To select preset number 20, press +10, +10 and 0.

Selecting a preset number on the main unit

Press TUNER/BAND to select a band. Then, press d

repeatedly or turn MULTI JOG.

Each time d is pressed, the next higher number is selected.

To clear a preset station

Select the preset number of the station to be cleared. Then, press

s CLEAR, and press a SET within 4 seconds.

The preset numbers of all other stations in the band with higher

numbers are also decreased by one.

Preset number

RADIO RECEPTION

TUNE

SOUND

RADIO RECEPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-MTD77 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info