Bedienungsanleitung Aiwa NSX-MTD77 (Seite 19 von 27) (Englisch, Französisch, Spanisch)

496587

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

ENGLISH

AI EDIT RECORDING

0-9

DISC

DIRECT

PLAY

MULTI JOG

The AI edit recording enables CD recording without worrying

about tape length and track length. When a CD is inserted, the

unit automatically calculates the total track length. If necessary,

the order of tracks is rearranged so that no track is cut short.

(AI: Artificial Intelligence)

AI edit recording will not start from a point halfway into the tape.

The tape must be recorded from the beginning of either side.

Insert the tape into deck 2, and press DOLBY NR

to turn Dolby NR on or off.

Insert the tape with the side to be recorded on first facing out

from the unit.

Press CD and load the disc(s).

Press CD EDIT/CHECK once.

“EDIT” lights up and “AI” flashes on the display.

When “PRGM” is displayed, press CD EDIT/CHECK again.

Press one of the DISC DIRECT PLAY 1-5 to select

a disc.

Press

f or

g to designate the tape length.

10 to 99 minutes can be specified.

In a few seconds, the tracks to be recorded on each side of

the tape are determined.

• The numbered buttons 0-9 or MULTI JOG are also available

to designate the tape length.

Example:

When using a 60-minute tape, press 6 and 0.

Tape length

Press

w REC/REC MUTE to start recording.

The tape is rewound to the beginning of the front side, the

lead segment is played through for 10 seconds, and recording

starts. When recording on the front (side A) ends, recording

on the back (side B) starts.

To stop recording

Press s. Recording and CD play stop simultaneously.

To clear the edit program

Press s CLEAR twice so that “EDIT” disappears on the display.

To check the order of the programmed track numbers

Before recording, press CD EDIT/CHECK to select side A or B,

and press f or g repeatedly or turn MULTI JOG.

To add tracks from other discs to the edit program

If there is any time remaining on the tape after step 5, you can

add tracks from other discs in the CD compartment .

1 Press CD EDIT/CHECK to select side A or B.

2 Press one of the DISC DIRECT PLAY 1-5, to select a disc.

3 Press the numbered buttons on the remote control to select

tracks.

A track which has a playing time longer than the remaining

time cannot be programmed.

4 Repeat steps 2 and 3 to add more tracks.

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than

the specified recording time printed on the label. This unit can

program tracks to use the extra time. When the total recording

time is a little longer than the tape’s specified recording time

after editing, the display shows the extra time (without a minus

mark), instead of the time remaining on the tape (with the minus

mark).

• Recording is inhibited if the erasure prevention tab on either

side of the tape is broken off.

• The AI edit recording function cannot be used with discs

containing 31 tracks or more. “TR OVER” is displayed if this is

attempted.

Program number

Programmed

track numbers

Track number

Remaining time

of recording

Programmed

tracks for side A

Tape side A

(front side)

AI EDIT

Tape side

RECORDING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-MTD77 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info