Bedienungsanleitung Aiwa NSX-V20 (Seite 12 von 62) (Englisch, Französisch, Spanisch)

496590

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

:.=

.“”

.’.❑

POWER

.;,,

,..-

~,.

.-..

...

.-:

b STANDSY/ON

s“

....

,..

J..

“.

.“

..:

““..

SHIFT

FUNCTION

R6 (AA)

... ---

:. . . . ---- “.;”

“.

. .

..”.

BEFORE OPERATION

ON THE MAIN UNIT

To turn on the unit+ See illustration ❑ .

Press the POWER button. The disc compartment may open and

close for resetting the unit.

For4 seconds afterturning on the unit, onlythefunction buttons and

the VOLUME control can be operated.

After use

Press the POWER button to turn off the power. The display

indication is faded and only the clock is displayed.

Headphone use

Connect headphones with a 06.3 mml 11,in. plug to the PHONES

jack. When the headphones areconnected, sound cannot be heard

from the speakers.

If the clock display flashes while the power is off

This is caused by a power interruption. The current time needs to

be reset (see page 14).

● If power is interuppted for more than approximately 24 hours, the

preset stations and timer settings need to be reset.

Flash window -+ See illustration E.

The flash window lights upwhile the power isturned on and flashes

when the disc compartment isopened or closed, and while the disc

trays are accessed.

To turn it off, press the CD button while pressing the ■ CLEAR

button.

To turn it back on, repeat the above.

● Do not perform this operation during recording.

ON THE REMOTE

Remote control setting

CONTROL

Detach the battery coveron the rear ofthe remote control and insert

two R6 (size AA) batteries. + See illustration ~.

Battery replacement

The maximum operation distance of the remote control should be

approximately 5 meters (16 feet). When this distance decreases,

replace the batteries with new ones.

● Do not mix different types of batteries, or old batteries with new

ones.

● When you are not going to use the unit for a long period of time,

remove the batteries to prevent possible electrolyte leakage.

Hints for correct operation

The remote control may not operate,correctly when:

● the line of sight between the remote control and the remote sensor

of the unit is exposed to intense light, such as direct sunlight.

● other remote controls are used nearby (television, etc.).

To use the @)buttons+ See illustration

❑ .

Each of the buttons has two different functions. One of these

functions is indicated on the button top, and the other on the plate

above the button.

To use the function indicated on the button top, just press the

button.

To use the function indicated on the piate above the button,

press the button while pressing the SHIFT button.

To use the FUNCTiON button + See illustration

❑ .

The FUNCTION button substitutes for the function buttons (TAPE,

TUNEFf/BAND, VIDEO/AUX, CD) on the main unit. Each time the

FUNCTION button is pressed, the functions are selected cyclically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-V20 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info