Bedienungsanleitung Aiwa NSX-V2100 (Seite 12 von 52) (Englisch, Französisch, Spanisch)

496591

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

PROGRAMMED EDIT

RECORDING

The Programmed edit function enables CD recording while

checking the remaining time on each side of the tape as the

tracks are programmed.

Insert the tape into deck 1.

4,5

3,7,8,9

Insert the tape-with the side to be recorded first facing out

from the unit. Press the TAPE button, and wind up the tape

with the +< button,

Press the CD button on the main unit and load

the disc (s).

Press the EDIT/CHECK button twice while

pressing the SHIFT button on the remote control.

PRGM is displayed.

Press the numeric buttons on the remote control

to designate the tape length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape,

press the 6 and O

buttons.

Maximum recording

Tape length

time for side A

Tape side A (front side)

Press one of the DISC DIRECT PLAY buttons to

select a disc and press the numeric buttons to

program a track.

Example: To select the 10th track of disc 2, press DISC

DIRECT PLAY 2 and the numeric buttons + 10 and O.

Remaining

Repeat step 5 for the rest of the tracks for side

A track whose playing time is longer than the remaining time

cannot be programmed.

Press the EDIT/CHECK button while pressing the

SHIFT button to select side B and program the

tracks for side B.

After confirming B on the display, repeat step 5.

Press the EDIT/CHECK button while pressing the

SHIFT button to select side A and press the

●

button on deck 1 to start recording.

CD play and recording of edited tracks for the first side start

simultaneously. When the end of the tape is reached, deck

1 enters the recording stop mode. After entering the recording

stop mode, go to step 9.

Press the EDIT/CHECK while pressing the SHIFT

button on the remote control for recording of

the second side.

After confirming B on the display, go to step 10.

Turn over the tape in deck 1 and press the ●

button.

Recording starts.

To stop recording

Press the

WA button on deck 1. Recording and CD play stop

simultaneously.

To check the order of the programmed track numbers

Before recording,

press the EDIT/CHECK button while pressing

the SHIFT button to select side A or B, and press the ++ or

➤> button repeatedly.

Program

Disc

Programmed track

number

numbers

Tape side

Track number

To change the program of each side

Press the EDIT/CHECK button while pressing the SHIFT button

to select side A or B, and press the

■ CLEAR button to clear the

program of the selected side. Then program tracks again.

To clear the edit program

Press the

■ button twice so that Al EDIT disappears on the

display.

● The edit function cannot be used with discs containing 31 tracks

or more.

● Recording is inhibited if the erasure prevention tab on either

side of the tape is broken off.

Total number of

programmed tracks

1 I ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-V2100 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info