• Playtime: 2.5-10 hours (varies by volume level and content)
• Battery charge time: 5-6 hours
• Dimensions: 372*193.3*166mm
• Weight: 3.7 kgs
• Keep the speaker and its accessories away from the reach
of kids as they might cause a choking hazard.
• Keep the speaker away from fire, water, liquids, extreme
heat, and strong magnetic fields.
• Do NOT use this speaker at high volume for extended
periods, as this may cause permanent hearing damage or
loss.
• Do NOT drop or knock the speaker on hard surfaces.
• Do NOT use chemicals or detergents to clean the speaker.
• Do NOT scrape the surface with sharp objects.
• Do NOT make unauthorized alterations to this product.
Listening music from external audio source
1.Power on the speaker.
2.Using the AUX Cable (φ3.5mm), connect your external
device to AUX-in port on speaker.
3.It will automatically turn to AUX-in mode, the LED
Indicator turns solid green.
Overvivew of Speaker
Charging
Battery Status
Music Control
BIuetooth connection
• 1 x Speaker
• 1 x Type-C charging Cable
• 1 x AUX Cable (Ф3.5mm)
• 1 x User Manual
Previous Song
Next Song
Light Mode
Play
Modes
Power on/off
Bluetooth LED Indicator
Battery LED Indicator
Pause/Play
Package Includes
2nd white light flashes
3rd white light flashes
Fully charged
Low battery (<20%)
Caution
Troubleshooting
Cannot connect with the device
Note: Under AUX-IN mode, skip songs are not workable.
Sound mode
Mode Change Button : Outdoor/Indoor
1.Before first time use, fully charge the built-in battery.
2.Connect the Type-C Cable (included) between
the Charging port on the speaker, and
a USB port on a computer or USB AC Adapter.
• Please check the following:
• The Bluetooth device supports A2DP profile
• The Speaker is within 10m from the device.
• The Speaker is in pairing mode, the LED indicator
blinking blue.
Note:
• When power on, the speaker automatically
reconnects to the last mobile device it was connected
to. (The speaker can memorize maximum of 8 paired
devices ).
• The speaker will automatically shut down after 10
minutes in pairing mode if no devices are paired for
power saving.
Make sure that the speaker is within 10 meters from
your mobile device,
1. Press button until hear a rising tone and the
Bluetooth LED Indicator fast blinking blue.
2. Go to the Bluetooth settings on your mobile
device, search and select “AIWA SB-X350P” from the list.
3. Once paired, the LED indicator turns blue.
Note: When the battery charge <5%, the speaker will
power off automatically.
Power On
Press button until hear a rising tone and the Bluetooth
LED Indicator light on.
Power Off
Press button until hear a descending tone and
the Bluetooth LED Indicator light off.Bluetooth Disconnection
TWS (True Wireless Stereo) Function
The TWS technology enables you to use two speakers
pairing via Bluetooth to create a wireless dual-channel
system to deliver true stereo sound effect.
TWS connection operation
1. Place the two speakers near each other (the distance
should not be over 10 meters).
2. Power on the two speakers, double click the
button
on one speaker as MASTER speaker (playback left
channel ), the LED indicator fast blinking Blue and gree
then the two speaker will pair to each other
automatically ( The other speaker will be as SLAVE
speaker and playback right channel )
3. Once paired, Master and slave speaker LED indicator
turn solid blue
Disconnect the TWS connection
No Sound
Poor sound quality
• Make sure the music volume is at audible level on both
your device and speaker.
• Make sure your device is successfully paired with the
speaker, the LED indicator turn solid blue.
Move the device closer to this Speaker or remove any
obstacle between them.
Just simple insert your TF card into the port, the speaker
can automatically turn to TF card reader mode, and play
the MP3 music store in the card.
TF card reader(micro SD card)
Battey LED Indicator
Double click “ ” mode button to change the sound
mode. The LED indicator slowly flash blue in outdoor
mode, and the LED indicator keep solid blue in indoor
mode.
Remark: This speaker's default mode is indoor.under the
USB disk and TF card mod, LED is green.
Volume Down/Volume Up
Charging port
USB card readerTF card reader
AUX input
Reset key
Press“ M ” mode button on one of the speaker until LED
Indicator fast blinking Blue to disconnect the TWS
connection.
Reset the speaker: lf the function buttons without
working, disconnect the charging cable, place a small
pin (<3mm) into the reset key and hold it for 2 seconds
until the LED light off.
Click ‘ ’ button to change the LED Lights modes.
1: Musical Pulse (Pulse from bottom to top)
2: Half-circle rotation (rotate with the rhythm of the music)
3: Full-Cyclic rotation (rotation speed is automatically
adjusted with the size of the music)
4: Flash rhythm (brightness flashes with the beats of the
music)
5: Musical Pulse (from the middle to the upper and lower
pulse)
6: Turn off the lights
LED lights Mode
Blinking Red (Sound
Prompts 3 times at 20%,
10%, and power off)
30% charged 1st white light flashes
30%-70% charged
70%-99% charged
3 solid white lights
56789
Press " M " button until the Bluetooth LED Indicator fast
blinking blue to disconnect the current connected device,
and go into new Bluetooth-paring mode.
Volume UP
Play/Pause
Next track
Previous track
Switch Bluetooth mode/Aux-in mode…………Click M
Click
Rotate the knob Clockwise
click
click
Volume DownRotate the knob Counterclockwise
Brauchen Sie Hilfe? Stellen Sie Ihre Frage.
Missbrauch melden von Frage und/oder Antwort
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Aiwa SB-X350P wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
