Bedienungsanleitung Aiwa xd ax 10 (Seite 55 von 64) (Englisch)

136491

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

C:\WINNT\Profiles\Administrator\My

Documents\XD-AX10_GB\01US13ADD-

CEK.fm

master page=right

XD-AX10

3-081-707-11(1)

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs.

Should any problem persist, consult your

nearest Aiwa dealer (for customers in the

U.S.A only).

Power

The power is not turned on.

, Check that the AC power cord is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely.

, The connecting cords are damaged.

, Check the connection to your TV (page 16)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, The disc is dirty or flawed.

, If the picture output from your player goes

through your VCR to get to your TV or if

you are connected to a combination TV/

VIDEO player, the copy-protection signal

applied to some DVD programs could affect

picture quality. If you still experience

problems even when you connect your

player directly to your TV, please try

connecting your player to your TV’s S

VIDEO input (page 16).

Even though you set the aspect ratio in “TV

TYPE” of “SCREEN SETUP,” the picture

does not fill the screen.

, The aspect ratio of the disc is fixed on your

DVD.

Sound

There is no sound.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, The player is connected to the wrong input

jack on the amplifier (receiver) (page 20,

21, 22).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL) jack,

check the audio settings (page 54).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will

come out when you select “2:STEREO,”

“2:1/L,” or “2:2/R.”

Sound is noisy.

, When playing a CD with DTS sound tracks,

noise will come from the LINE OUT L/R

(AUDIO) jacks (page 25) or DIGITAL

OUT (COAXIAL) jack.

Sound distortion occurs.

, Set “AUDIO ATT” in “AUDIO SETUP” to

“ON” (page 53).

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“AUDIO DRC” to “TV MODE” (page 53).

, Set “AUDIO ATT” in “AUDIO SETUP” to

“OFF” (page 53).

Operation

The remote does not function.

, There are obstacles between the remote and

the player.

, The distance between the remote and the

player is too far.

, The remote is not pointed at the remote

sensor on the player.

, The batteries in the remote are weak.

,continued

01US01COV.book Page 55 Thursday, December 5, 2002 6:23 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa xd ax 10 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info