48833
8
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
8
En
ADJUSTMENTS BEFORE OPERATION
Power
Turning the unit on
Press power 6 standby/on (POWER on the remote
control).
Alternatively, press BAND on the remote control.
Turning the unit off
Press power 6standby/on again.
The unit goes into standby.
Volume
Press volume (N / M) (VOL (k/i) on the remote
control).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 22 or higher, it is
automatically turned down to 21 the next time the unit is turned
on.
volume
(N/M)
sound/
timer
COLOR
CLOCK
EQ
POWER
BAND
SHIFT
VOL(k/i)
aset
enter/color,
f,g,sclear
power
6standby/on
eco/demo
f,g
sSTOP
aPAUSE
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate the DEMO
Press eco/demo. The clock flashes. For setting the clock,
see page 9.
ECO mode
Reduces power consumption with the following operations.
After clock is set, this unit allows you to regulate its power
consumption by displaying nothing on the display while the
power is off. This is called power economizing mode.
Press eco/demo while the unit is turned off.
Each press of this button changes the display status as follows:
1 Demo display (power economizing mode canceled)
2 Power economizing mode
3 Clock display (power economizing mode canceled)
When power economizing mode is activated
When the unit turns off, "ECO MODE" is displayed for 4
seconds, and everything on the display clears.
Only the red indicator on the power button lights to show
that power is being supplied to the unit.
Standby power consumption
When power economizing mode is activated: 1.6 W
When power economizing mode is deactivated: 5.4 W
Changing the display color
The display color can be changed to 12 different colors (select
color mode). You can also select 12 different colors for each
function (function color mode).
You can select between select color mode and function color
mode.
Select color mode
1
Press enter/color (COLOR on the remote control)
to display "SELECT C" while the power is on.
2
Within 4 seconds, push the dial left (f) or
right (g) (press f or g on the remote
control) to select the color.
Function color mode
1
Hold down enter/color (COLOR on the remote
control) until "F-CL" is displayed.
2
Push the dial left (f) or right (g) (press
f or g on the remote control) so that "CL
EDIT" is displayed.
If there is no operation for 4 seconds, setting is canceled.
3
Press enter/color (COLOR on the remote control).
The source name and color number flashes on the display.
If there is no operation for 4 seconds, setting is canceled.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aiwa XR-M313 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Aiwa XR-M313

Aiwa XR-M313 Bedienungsanleitung - Französisch - 15 seiten

Aiwa XR-M313 Bedienungsanleitung - Spanisch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info