Bedienungsanleitung Aiwa XR-MD90 (Seite 16 von 104) (Englisch, Französisch, Spanisch)

496636

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

VARIOUS WAYS OF MD

RECORDING

Recording through digital inputs

Digital recording of CD audio signals to MDs gives recordings

with no degradation in sound quality. You can use any of the

following methods to record from CDs to MDs.

“ Record a complete CD onto an MD

● Record a desired track of a CD onto an MD

● Record your favorite CD tracks in any order

Recording through analog inputs

Recording through analog inputs from the tuner or external

equipment connected to the TAPE IN jacks and AUX IN jacks

can be done easily. Recording through analog inputs from a CD

is also possible.

Extended recording

Twice as long as the time printed on the MD can be obtained by

using the monaural recording mode.

● Nothing other than an MD should be inserted in the disc drive,

otherwise the disc may become scratched, causing a

malfunction.

o Do not give a strong shock or disconnect the AC cord during

recording or a TOC* recording. Doing so may cause the errors

in the TOC recording and the contents cannot be played back.

* TOC : An abbreviation of Table Of Contents

The TOC data functions as a coded index of the recorded

material. The unit records the TOC data such as a playing time ,

and recorded address on an MD

To prevent accidental erasure of recorded material

Slide the record-protect tab as shown below.

Slide the tab so that it is completely locked,

If a recording is attempted when the tab is set to the protected

position, “Protected” appears on the display. Move the protect-

tab to the original position.

ABOUT THE INDEX MARK

You can easily select the desired tracks by registering index

marks during recording.

Choose the appropriate method to register index marks.

AUTO MARK FUNCTION

When recording from a CD using the CD P MD button

The index mark information recorded on the CD is copied.

CD 2nd track

3rd track

4th track

Recording

(MD)

2nd track

3rd track 4th track

A A A

:Index mark

The auto mark function is applied in the following cases:

–When recording a whole CD onto an MD (page 17)

–When performing programmed recording of a CD (page 19)

You cannot add the index marks using the time mark function

and manual mark function described below,

When recording CDs or other sources using the MD

REC button

An index mark is registered automatically when a sound signal

is input after a blank section lasting more than 2 seconds.

Recording

(MD)

2nd track

3rd track

4th track

A A

A :Index mark

TIME MARK FUNCTION

When recording CDs or other sources using the MD REC button

(pages 20 and 21), you can optionally record index mark

information at an interval of 5 minutes.

This makes it easy to locate recorded radio broadcast material,

etc.

MANUAL MARK FUNCTION

When recording CDs or other sources using the MD REC button

(pages 20 and 21), you can record index mark information

anytime you want by pressing the ENTER button.

16 EfVGLLSF/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa XR-MD90 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info